Overview
This 0.5m long MS-M RF 3-Pin cable assembly is constructed from RG178 Silver Plated Copper Clad Steel Wire with FEP insulation and an attenuation of 102dB/100m at 500MHz. Screwlocks are provided to secure the MS-M connector to the associated product.
Selection Guidance
40-979-526/40-979A-526: For use with any MS-M product, when used on some connectors there may be spare leads which do not connect to the RF product.
40-979-525/40-979A-525: For use with 40-755 where 25 connections are required and with the LOWER CONNECTOR BANK B connection of the 40-754 where 25 connections are required.
40-979-524/40-979A-524: For use with 40-754 connector that supports 8 off SPDT switches.
40-979-503/40-979A-503: For use with 40-754 connector that supports 1 off SPDT switch.
Key Features
- MS-M RF 3-Pin Cable Assy
- Female to Unterminated
- RG178 Cable
- 0.5m Long (Other Lengths Available)
- 130mm of Separate Cores with Cut Ends
- Max Frequency 1.3GHz
- 50 Ohm Impedance
- Braided Sleeve Over Outer Layers
- Fully Screened Cable Construction
- 6-32 UNC MS-M Screwlock
What's new!
Learn about our cable design tool
Design cables that meet your exact specification
Learn more
Specifications
Connector Type (End A)
|
MS-M RF 3-Pin | |
Gender (End A)
|
Female | |
Securing Method (End A)
|
6-32 UNC screwlocks male & female | |
Suitable for Pickering Switch Products
|
Yes | |
Connector Type (End B)
|
Unterminated | |
Length (m)
|
0.5 |
Sales & Support