Waveforms are generated by the user and passed to the 41-620 driver in a file. This file may be a text file which may be easily generated in a text editor or spreadsheet, or a binary file generated by other means. This article confines itself to text file waveform generation.
There are 2 types of file that may contain the output level data, binary or text, here we consider the text file format.
Due to the nature of the card design, the waveform data must be comprise a number of entries which is a power of 2, minimum 8 points. So, 8, 16, 32, 64 128 etc data points must be present, any other number of entries will cause an error when the file is loaded.
The simplest form of data representation is to generate levels between 0.0% and 100.0 % where 0% is the minimum generator output of -5V and 100% is the maximum output of +5V, an output of 0V is represented as 50% in the file.
So, a file containing 8 levels thus: Will generate:
And data points : Will generate:
Note in the second case the range 30-70% is used, restricting the output levels to +- 2V.
The option 'normalize' will re-scale the input data points to fill the entire 100% range, so loading the second data file with normalize will generate the full amplitude signal as in the first example.
Return to Pickering Interfaces web site www.pickeringtest.com