差分和电信PXI开关模块

  • 差分多路复用开关,适用于切换串行数据通信信号,比如USB和以太网
  • 设计用于切换差分对携带的信号
  • 在PXI环境中可使用VISA和Kernel以及IVI驱动,在LXI环境中可使用Kernel和IVI驱动
  • 部分型号可被我们的 eBIRST 开关系统诊断测试工具 所支持,这些工具可帮助快速简便地在LXI,
    PCI和PXI开关系统中查找继电器故障。

是要求切换携带在具有受控差分阻抗的差分信号对上的信号的理想之选

我们的差分PXI开关设计用于切换串行接口比如RS232,USB,以太网和CAN总线的信号。该系列包括多路复用开关和故障注入开关。40-736多路复用开关能够用来切换千兆以太网信号。40-201系列模块能够用来以最高千兆以太网的速度在差分信号用于故障注入。

支流开关设计用于SONET/SDH多路复用开关应用场合,在75Ω或120Ω的差分系统中可达2兆比每秒或1.5兆比每秒的数据传输速率。可提供8个或16个支流通道或合并开关,在部分支流通道上允许数据按顺序通过,多路复用开关使得测试设备可以连接进入部分通道。

我们还设计并提供用于将差分开关与应用的特殊连接器相连的接口适配器。另外,我们为所有产品提供标准的 三年质保

下面这张表格有助于您选择适合您应用的产品类型:
电信,差分开关模块
Untitled Button
Switch Type
Max I (A)
Max V DC
Poles
Banks
Channels
Function
Fault Buses
Z (Ω)
Max f (MHz)
Price

40-735-912-S1

PXI Dual 18 Channel MUX, 96-Pin SCSI Connector

Multiplexer designed for switching the data lines of serial interfaces (RS232, USB)

Switch Type
Mix
Max I (A)
0.5
Max V DC
150
Banks
2
Channels
18
Function
Mux
Z (Ω)
90
Max f (MHz)
200
Platform
PXI

40-735-912-S4

PXI Single 36 Channel MUX, SMB Connectors

Multiplexer designed for switching the data lines of serial interfaces (RS232, USB)

Switch Type
Mix
Max I (A)
0.5
Max V DC
150
Banks
1
Channels
36
Function
Mux
Z (Ω)
90
Max f (MHz)
200
Platform
PXI

40-735-902-S2

PXI Single 10 Channel MUX, XLR Connectors

Multiplexer designed for switching the data lines of serial interfaces (RS232, USB)

Switch Type
Mix
Max I (A)
0.5
Max V DC
150
Banks
1
Channels
10
Function
Mux
Z (Ω)
90
Max f (MHz)
200
Platform
PXI

40-735-902-S3

PXI Single 18 Channel MUX, BNC Connectors

Multiplexer designed for switching the data lines of serial interfaces (RS232, USB)

Switch Type
Mix
Max I (A)
0.5
Max V DC
150
Banks
1
Channels
18
Function
Mux
Z (Ω)
90
Max f (MHz)
200
Platform
PXI

40-965-901

Interface Board, Low Cost, 8:1 Ethernet RJ45

Ethernet Interface for 40-736 Data Communications MUX

¥3,100

40-965-907

Interface Board, Compact, 8:1 Ethernet RJ45

Compact Ethernet Interface for 40-736 Data Communications MUX

¥4,975

40-965-910

Interface Board for Gigabit Ethernet

Interface board that allows the 40-201 Fault Insertion Switch to be used with Gigabit Ethernet

¥5,425

40-965-911

Interface Board for 100 BaseT Ethernet

Interface board that allows the 40-201 Fault Insertion Switch to be used with 100 BaseT Ethernet

¥6,750

40-739-005

PXI/PXIe MIL-STD-1553 Multiplexer, Single 4-Channel, 2-Pole

Designed for physical layer multiplexing or demultiplexing differential signals that conform to the MIL-STD-1553 specification. Supported by our eBIRST Switching System Test Tools

Switch Type
EMR
Max I (A)
0.8
Max V DC
120
Poles
2
Banks
1
Channels
4
Function
Mux
Product Type
Multiplexers
Platform
PXI/PXIe
¥10,275

40-200-004

CAN/FlexRay/Differential Bus PXI Fault Insertion Switch - 4 Channel

Designed to simulate common faults on two wire communications interfaces. Supported by our eBIRST Switching System Test Tools

Switch Type
EMR
Max I (A)
0.3
Max V DC
100
Channels
4
Fault Buses
4
Product Type
Fault Insertion Switching
Platform
PXI
¥12,700

40-739-006

PXI/PXIe MIL-STD-1553 Multiplexer, Dual 4-Channel, 2-Pole

Designed for physical layer multiplexing or demultiplexing differential signals that conform to the MIL-STD-1553 specification. Supported by our eBIRST Switching System Test Tools

Switch Type
EMR
Max I (A)
0.8
Max V DC
120
Poles
2
Banks
2
Channels
4
Function
Mux
Product Type
Multiplexers
Platform
PXI/PXIe
¥13,725

40-735-902

PXI 18 Channel Data Comms MUX, 96-pin SCSI

Multiplexer designed for switching the data lines of serial interfaces (RS232, USB)

Switch Type
Mix
Max I (A)
0.5
Max V DC
150
Banks
1
Channels
18
Function
Mux
Z (Ω)
90
Max f (MHz)
200
Platform
PXI
¥14,300

40-201-004

Ethernet/AFDX/BroadR-Reach PXI Fault Insertion Switch - 4 Channel

Designed to simulate common faults on high speed two wire communications interfaces. Supported by our eBIRST Switching System Test Tools

Switch Type
EMR
Max I (A)
0.3
Max V DC
100
Channels
4
Fault Buses
2
Product Type
Fault Insertion Switching
Platform
PXI
¥14,475

40-739-001

PXI/PXIe MIL-STD-1553 多路复用开关,单组 16通道,双刀

用于切换符合MIL-STD-1553标准规格差分信号的物理层多路复用开关。
适用于eBIRST 开关系统检测工具

Switch Type
EMR
Max I (A)
0.8
Max V DC
120
Poles
2
Banks
1
Channels
16
Function
Mux
Product Type
Multiplexers
Platform
PXI/PXIe
¥16,900
Switch Type
EMR
Function
Mux
Platform
PXI
¥16,950

40-739-003

PXI/PXIe MIL-STD-1553 多路复用开关,单组 8通道,双刀

用于切换符合MIL-STD-1553标准规格差分信号的物理层多路复用开关。
适用于eBIRST 开关系统检测工具

Switch Type
EMR
Max I (A)
0.8
Max V DC
120
Poles
2
Banks
1
Channels
8
Function
Mux
Product Type
Multiplexers
Platform
PXI/PXIe
¥17,000

40-739-004

PXI/PXIe MIL-STD-1553 Multiplexer, Dual 8-Channel, 2-Pole

Designed for physical layer multiplexing or demultiplexing differential signals that conform to the MIL-STD-1553 specification. Supported by our eBIRST Switching System Test Tools

Switch Type
EMR
Max I (A)
0.8
Max V DC
120
Poles
2
Banks
2
Channels
8
Function
Mux
Product Type
Multiplexers
Platform
PXI/PXIe
¥17,375

40-200-008

PXI 8通道串行总线故障注入开关

设计用于仿真串行通讯线路上常见的各种故障。 现在支持继电器自检测工具

Switch Type
EMR
Max I (A)
0.3
Max V DC
100
Channels
8
Fault Buses
4
Product Type
Fault Insertion Switching
Platform
PXI
¥17,825

40-201-008

PXI 8通道高速串行总线故障注入开关

设计用于仿真串行通讯线路上常见的各种故障。 现在支持继电器自检测工具

Switch Type
EMR
Max I (A)
0.3
Max V DC
100
Channels
8
Fault Buses
2
Product Type
Fault Insertion Switching
Platform
PXI
¥18,025

40-735-912

PXI 36 Channel Data Comms MUX, 96-pin SCSI

Multiplexer designed for switching the data lines of serial interfaces (RS232, USB)

Switch Type
Mix
Max I (A)
0.5
Max V DC
150
Banks
1
Channels
36
Function
Mux
Z (Ω)
90
Max f (MHz)
200
Platform
PXI
¥20,100

40-739-002

PXI/PXIe MIL-STD-1553 多路复用开关,双组 16通道,双刀

适用于符合MIL-STD-1553标准规格差分信号的物理层多路复用或解多路复用。
可被我们的 eBIRST 开关系统检测工具所支持

Switch Type
EMR
Max I (A)
0.8
Max V DC
120
Poles
2
Banks
2
Channels
16
Function
Mux
Product Type
Multiplexers
Platform
PXI/PXIe
¥21,725

40-736-001

PXI Data Communications Multiplexer

Designed specifically for multiplexing or de-multiplexing up to 32 differential signal pairs having controlled 100Ω differential impedance. Supported by our eBIRST Switching System Test Tools

Switch Type
EMR
Max I (A)
0.3
Max V DC
100
Poles
2
Banks
8
Function
Mux
Product Type
Multiplexers
Platform
PXI
¥22,925

40-795-001

PXI 8 Trib Daisy Chain Switch 120Ohm Balance

Daisy Chain Switching Module designed for telecom test applications

Switch Type
EMR
Function
Mux
Platform
PXI
¥24,825
Switch Type
EMR
Function
Mux
Platform
PXI
¥30,800

Filter

Switch Type

EMR - Electro-Mechanical Relay, cost-effective, medium power switching. Reed - reed relays, excellent low-level switching, fast, long life. Solid-State - very fast, indefinite life, high power switching, but high leakage and insertion loss.

Max I (A)

Maximum continuous current each switch can carry.

Max V DC

The maximum voltage that may be applied to each switch.

Poles

The number of common terminals simultaneously switched by a single operation. … more

Banks

The number of independent switch topologies on a single module.

Channels

The number of discrete channels in a single topology.

Function

Required switch topology.

Fault Buses

The number of external fault conditions that may be applied to each channel.

Z (Ω)

The input impedance of each switch channel.

Max f (MHz)

The maximum usable frequency of each switch topology.

Loading