Overview
The 40-200A-004 (PXI) and 42-200A-004 (PXIe) are 4 channel fault Insertion modules designed to simulate common faults on two wire communication interfaces such as CAN Bus. Modules are available to supports 4 or 8-channels of two wire serial interfaces. Each channel can simulate an open fault in either or both wires, a short between both wires or a short to one of eight externally applied fault connections, such as a battery connection or ground, via four fault buses.
Each channel can support up to 0.3A and is rated to handle up to 100V between the wire pairs. The wire pairs have controlled transmission line impedance suited to most differential pair signalling systems, including fast CAN Bus interfaces and RS232. Each fault bus is capable of carrying 2A allowing multiple channels to be connected to the same fault condition. Additionally, each fault bus features a changeover relay to allow the user to connect alternative fault conditions to the fault buses.
Key Features
- Available as PXI or PXIe Modules
- Fault Insertion on 4 or 8-Channels of Two Wire Connections
- Suited for CAN Bus and FlexRay Fault Insertion
- Controlled Transmission Line Impedance
- Simple Insertion of Shorted Pair, Open and Battery/Ground Connection
- Drivers supplied for Windows and Linux, plus support for Real-time systems
- PXI Versions Supported by PXI or LXI Chassis
- Supported by eBIRST Switching System Test Tools
- 3-Year Warranty
Downloads
-
PDF Data Sheet
Includes full information and specifications1.41 MB -
PDF Manual
Includes manual, extended specifications, installation instructions and data1.64 MB -
Related 78 Way D-type Connector Accessories Datasheet
A complete list and documentation for mating connection accessories5.67 MB -
PDF LoV
Letter of Volatility for the 40/42-200A module178.24 KB -
Software drivers & downloads
for Switching & Simulation Productsdownloads.pickeringtest.com -
CAD models
find CAD 3D models for products heredownloads.pickeringtest.com