Search "张家界短信营销公司✔️【飞机-》 @sms10666】专业张家界短信营销公司发送渠道✔️ .u"
-
40-201-008
Ethernet/AFDX/BroadR-Reach PXI Fault Insertion Switch - 8 Channel
Designed to simulate common faults on high speed two wire communications interfaces. Supported by our eBIRST Switching System Test Tools
¥18,025.00
-
NI MAX PXI Chassis Configuration Problem
-
42-925-001
PXIe Full Hybrid Chassis, 18-Slot (Gen 3)
PXIe 18-Slot Chassis with Gen 3 performance, 16 PXIe Hybrid slots
¥93,050.00
-
40-924-001
PXI Chassis, 8-Slot
A fully compliant 8-slot PXI chassis that can accept any 3U PXI or cPCI module.
-
Switching USB and Ethernet Signals
Information on using USB and ethernet to switch, including information on AFDX switching and differential transmission lines
-
Quick Start Videos for LXI/USB 2, 4 & 6-slot Chassis
Learn how to get started in these Quick Start videos for our LXI/USB modular chassis
-
41-752A-011
PXI/PXIe Battery Simulator Module, 6-Channel, V/I Readback, 750 V Isolation
Six Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.
¥56,700.00
-
41-752A-012
PXI/PXIe Battery Simulator Module, 4-Channel, V/I Readback, 750 V Isolation
Four Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.
¥48,125.00
-
41-752A-013
PXI/PXIe Battery Simulator Module, 2-Channel, V/I Readback, 750 V Isolation
Two Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.
¥39,700.00
-
40-261-001
PXI Precision Resistor Module 2-channel 1.5Ω to 2.9kΩ
Featuring fine resistance setting resolution and excellent resistance stability and accuracy through the use of innovative switching networks and software correction techniques
¥42,950.00
-
40-252-054
PXI 5W Programmable Resistor Module, 1-Channel, 3Ω to 22.3MΩ
A simple solution for applications requiring power handling of up to 5W per channel
¥42,850.00
-
40-253-034
PXI 10W Programmable Resistor Module, 1-Channel, 2Ω to 102kΩ
A simple solution for applications requiring power handling of up to 10W per channel
¥42,850.00
-
40-251-054
PXI 2.5W Programmable Resistor Module, 2-Channel, 3Ω to 22.3MΩ
A simple solution for applications requiring power handling of up to 2.5W per channel
¥42,850.00
-
95-901-001
MBoS Support Frame For 40-908-x01 or 40-914-x01 Chassis
Frame assembly for mounting a Pickering 40-908-x01 or 40-914-x01 PXI chassis in the Modular Breakout System.
-
40-297-050
PXI Precision Resistor Module 6-Channel, 3Ω to 1.51MΩ
Alternative product available, please refer to the 40-297A range
¥41,575.00
-
Where We Sell and Support Our Products
-
By Switching
Signal switching for virtually every application that can be tested.
-
50-298-054
PCI High Density Pecision Resistor Card, 6-Channel, 4Ω to 22.3MΩ
A simple solution for applications requiring accurate simulation of resistive sensors.
¥46,250.00
-
40-297A-050
PXI/PXIe High Density Precision Resistor Module, 6-Channel, 3 Ω to 1.51 MΩ, 0.125 Ω Resolution
A simple solution for applications requiring accurate simulation of resistive sensors.
¥41,575.00
-
40-298-054
PXI High Density Precision Resistor Module, 6-Channel, 4Ω to 22.3MΩ
A simple solution for applications requiring accurate simulation of resistive sensors.
¥42,850.00
-
40-558-801-384x16
PXI 8-slot BRIC Matrix, 384x16, 1 pole (12 Sub-cards)
Ultra-high-density module with single analog bus. Uses instrumentation quality reed relays. Supported by our Diagnostic Test Tools: BIRST and eBIRST
¥1,021,975.00
-
50-635A-108
PCI 2 Amp Multiplexer, Quad 8-Channel, 1-Pole
2 Amp Multiplexer card is available in 9 standard configurations. Supported by our eBIRST Switching System Test Tools
¥9,250.00
-
50-635A-107
PCI 2 Amp Multiplexer, Dual 4-Channel, 4-Pole
2 Amp Multiplexer card is available in 9 standard configurations. Supported by our eBIRST Switching System Test Tools
¥9,250.00
-
A020GFR-T-0A200
20-Pin GMCT Cable, Female to Unterminated, Tinned Ends, 10A, 2m
Discontinued
-
A020GFR-T-0A100
20-Pin GMCT Cable, Female to Unterminated, Tinned Ends, 10A, 1m
Discontinued
Useful links
-
Product Selector
Searching for a product? Find the right product for your requirements with our Product Selector.
-
Find documentation
Looking for technical documentation? Try the search facility in our Knowledgebase.
-
Find an office/agent
Need to find your contact? Discover our global network of offices and agents.
-
Find an expert
Need to develop a solution to meet your needs? Discover our global network of solution partners.