37-Pin D-Type Female Solder Pin HV
37-Pin Female D-Type Connector with Backshell, Solder Pin - High Voltage
The 41-754-011 and 43-754-011 are 4 channel battery simulators, capable of supplying up to 8 V and 5 A per channel. The channels are fully isolated from ground and from each other allowing series connection to simulate batteries in a stacked architecture. The isolation barrier (1000 V channel to GND and 750 V channel to channel) allows the module to be used as a battery stack representative of those used for vehicle propulsion..
An equally important function of each channel is the ability to simulate a battery under charge. Each channel can sink up to 7 W with the ability to handle higher wattage/surges with some duty cycle, which is programmed by setting a charging current limit.
Each channel provides independent power and sense connections, allowing the simulator to sense a remote load and correct for wiring losses. The battery simulator is designed to respond to dynamic loads, minimizing the need for local decoupling capacitors at the load. The module also has the ability to independently read the voltage at the load (via sense lines) and current for each channel.
These modules can be combined with our other PXI switch and simulation modules, including high voltage switching, fault insertion, thermocouple simulation, RTD simulation, as well as with other vendors' PXI modules, such as a CANbus interface, to create a fully flexible BMS test system.
Account
Appearance
Hi , I'm TESS - your friendly AI agent
TESS is a moderated, AI agent. TESS can make mistakes, please verify important information independently.