Pickering Interfaces Adds USB Test and Instrument Control to PXI Test Systems


Read next
EDITORIAL CONTACT:
David Owen
Pickering Interfaces
[email protected]
September 2012

Pickering Interfaces Adds USB Test and Instrument Control to PXI Test Systems

Clacton on Sea, UK - Pickering Interfaces is expanding its range of PXI modules supporting USB products with a new module, the 40-738, that adds USB 2 interfacing to PXI test solutions.

The 40-738 is a single slot 3U PXI module that combines a USB 2 hub and USB data and power switching to provide a programmatically controlled connection between the PXI controller’s PCI interface and USB products. The USB products can be devices under test or USB instrumentation. The 40-738 supports the operation of 8 USB products from a single module and provides standard USB 0.5A device power on all channels.

USB products connected to the 40-738 initiates the same driver install procedures familiar to USB users. The PXI controller, remote or embedded, installs using the vendor’s drivers as though the product was connected to the controller’s USB ports. In addition, the 40-738 provides a means to independently connect or disconnect the USB data and power wires, allowing the user to simulate fault conditions on the USB interface, or completely disconnect the USB product as though the USB connector had been physically unplugged. This method assures that the connected USB device on a physical  port is released at the time of disconnect. As well as providing a programmatically controlled USB connection, the 40-738 eliminates the need for free standing powered hubs in a system - it creates a system where USB connectivity is installed through the test system rather than the controller.

In addition to aiding the testing of USB products the 40-738 allows the addition of USB instrumentation such as power meters, scopes, and data acquisition products – expanding the range and types of test products that can be supported from a PXI system. Combined with connections from the controller’s Ethernet port to LXI instrumentation. it allows the controller to be at the heart of hybrid tests systems which use the industries primary control interfaces of PXI, LXI, GPIB, and USB.

Pricing and availability information is supplied on our web site www.pickeringtest.com

About Pickering Interfaces

Pickering Interfaces is a market innovator in signal switching and conditioning for a broad range of applications and architectures, with the largest range of switching cards in the industry for PXI, LXI, PCI, VXI and GPIB applications. Pickering Interfaces has provided solutions to both commercial and military applications. In addition, Pickering’s range of instrumentation provides innovative test solutions to users and integrators of modular test systems.  Pickering Interfaces operate globally with direct operations in the US, UK, Germany, Sweden, France, Czech Republic, and Engineering support in China, together with additional representation in countries throughout the Americas, Europe and Asia.

Press Contact

Kimberly Otte

  [email protected]

  •  +1 978-455-0376