LXI - Running

    <BACK HOME NEXT>

    Firstly connect the network cable to the LXI device and then power the unit on.

    During the boot process the LXI will display various LED sequences after about 1 minute just three green LEDs should remain on as shown.

    Please check the status LEDs

    Three LEDs - I correctly have three green LEDs

    Three LEDs

    LAN Flashing Green - LXI Identification

    LXI Identification

    No LAN - Please check network cable types

    No LAN detected

    No LED - Please Check Fuses

    Check fuses

    LAN Flashing Red - IP Conflict or invalid configuration - Reset procedure

    LAN Flashing Red or  LAN Flashing Red

    PWR LED - If other LEDs do not appear after about 1 minute - Please contact support

    Only Power

    LXI Booting - If these LEDs remain on for longer than a few minutes - Please contact support.

    LXI Booting 
    LXI Booting

    Need Help？



    Knowledgebase

    Information on software drivers, product comparisons and technical support for our entire product range.

    Knowledgebase


    Product Selector

    This tool will help you narrow down our offering to get you the correct switch and simulation solution you need.

    Try the selector


    Resource center

    Success stories, product videos and more—find the information you need about our switching and simulation.

    Resources you need


    Worldwide presence

    Find support across the globe, with offices and agents in the Americas, Europe and Asia. 

    Find local office or agent

      United States - English
    © 2023 Pickering Interfaces Ltd