Reset Procedure

If for some reason an unknown or invalid IP address has been set or an unknown security password has been set, the LXI maybe reset back to factory settings.

Turn on the LXI wait for the RDY indication as shown.

RDY light lit

Please note that an LXI chassis may have two reset buttons, Reset & ALARM Reset

The Alarm Reset only silences the chassis temp/voltage & fan alarms.

Reset - Use this reset to go back to factory configuration.

Hold the Reset button until only the PWR LED is illuminated (approx 5 seconds), release the reset button.

Only the power LED light lit

Wait for the unit to reboot.

Reboot Lights

As a final step the unit LXI should be powered off and back on to make sure the new configuration is loaded.

New Configuration Loaded

Please note - All configuration that was set will have been deleted and must now be reconfigured, chassis name, Fixed IP, security password etc.
After the reset the LXI will default back to DHCP as the first IP configuration method.

Need Help´╝č


Information on software drivers, product comparisons and technical support for our entire product range.


Product Selector

This tool will help you narrow down our offering to get you the correct switch and simulation solution you need.

Try the selector

Resource center

Success storiesproduct videos and more—find the information you need about our switching and simulation.

Resources you need

Worldwide presence

Find support across the globe, with offices and agents in the Americas, Europe and Asia. 

Find local office or agent