100-Pin Micro-D Connector with Backshell, IDC for Ribbon Cable, Female, With M3 Screwlocks
Estimated shipping is 15 to 30 working days
Please contact sales office for availability
This accessory is designed to allow users to directly terminate a cable to the connector. It is difficult to terminate cable to the 100-Pin SCSI Style Micro-D connector because of the high density and fine pitch. Pickering Interfaces recommends the use of purchased cable assemblies for applications where most or all of the contacts are in use.
Recommended Cable: Ribbon cable, 100W Round & Flat, 0.635mm pitch, 7/0.127mm (28 AWG)
or 1/0.254mm (30AWG), 0.65mm O/D
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
|Connector Type (End A):||100-Pin 1.27mm pitch Micro-D|
|Gender (End A):||Female|
|Gender (End B):||Female|
|Securing Method (End A):||M3 screwlocks male|
|Suitable for Pickering Switch Products:||No|
Search our knowledgebase for information on software drivers, product comparisons and technical support for our entire product range.
Because we offer such a large range of products, this tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
We supply and support our products across the globe, with seven offices in the Americas, Europe and Asia as well as additional representation.