A 6 Channel Fault Insertion switch designed for the simulation of fault conditions in automotive systems
Estimated delivery is 15 to 30 working days
Please contact sales office for availability
The 40-192 is a 6 Channel Fault Insertion switch designed for the simulation of fault conditions in automotive systems.
The module uses solid state switching elements and is capable of switching current up to 10A. It is designed
to be able to insert 3 different fault conditions between the test fixture and the equipment under test: Open-Circuit,
Short-Circuit between UUT connections, Short-Circuit to other fault conditions such as POW/IGN/GND via Fault
Insertion Bus. Through relays on each channel enable signals to the UUT to be held open-circuit. Fault Insertion
Buses allow any channel to be shorted to any other channel and also enable any channel to be connected to an
external fault condition.
Note: For new applications please consider the 40-192-012 version of this product which is functionally the same.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
|Product Type:||Fault Insertion Switching|
|Switch Type:||Solid State|
|Max I (A):||10|
|Max V DC:||200|
Search our knowledgebase for information on software drivers, product comparisons and technical support for our entire product range.
Because we offer such a large range of products, this tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
We supply and support our products across the globe, with seven offices in the Americas, Europe and Asia as well as additional representation.