A 6 Channel Fault Insertion switch designed for the simulation of fault conditions in automotive systems.
Supported by our eBIRST Switching System Test Tools
Estimated delivery is 15 to 20 days
Please contact sales office for availability
This PXI fault insertion switch uses solid state switching elements and is capable of switching current up to 10A. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test:
Through relays on each channel enable signals to the UUT to be set open-circuit. Fault Insertion Buses allow any channel to be shorted to any other channel and also enable any channel to be connected to an external signal such as Power, Ignition or Ground to simulate fault conditions. The module is supplied with 2 fault buses.
(If no specifications are present, please see the product datasheet under downloads)
|Product Type:||Fault Insertion Switching|
|Switch Type:||Solid State|
|Max I (A):||10|
Search our knowledgebase for information on software drivers, product comparisons and technical support for our entire product range.
Because we manufacture our products in-house, we are able to provide you with guaranteed long-term support and low obsolescence.
We supply and support our products across the globe, with seven offices in the Americas, Europe and Asia as well as additional representation.