PXI 2A Fault Insertion Switch 64-chan 1-bus

Overview

The 40-190 is a 64 Channel Fault Insertion switch, primarily designed for the simulation of fault conditions in automotive applications involving the reliability testing of safety critical controllers. It is designed to be able to insert 3 different fault conditions between the test fixture and the equipment under test: Open-Circuit, Short-Circuit between UUT connections, Short-Circuit to other fault conditions such as POW/IGN/GND via Fault Insertion Bus. Through relays on each channel enable signals to the UUT to be held open-circuit. Fault Insertion Buses allow any channel to be shorted to any other channel and also enable any channel to be connected to an external fault condition. The module is available with either 1 fault bus (40-190-001) or 2 fault buses (40-190-002). A 4 channel multiplexer on each bus allows an external signal level such as Power, Ignition or Ground to be selected as the fault condition. 

Key Features

• 64 fault insertion channels
• Suitable For Automotive ECU Burn-in/Endurance Test Applications
  
• High Density Low Cost Solution
• Simulation of Various Types of Electrical Fault, Enabling Rigorous Fault Testing
• Choice of 1 or 2 Fault Insertion Buses
• Fault Bus MUX For Selecting External Fault Conditions
• 2A Hot or Cold Switching
• Switch up to 150v DC with 60W max power
• VISA and Kernal Drivers supplied for windows XP/Vista/7/8
• Supported by PXI and LXI Chassis
• Supported by eBIRST Switching System Test Tools
• 3 year warranty