A six channel fault insertion switch designed for the simulation of fault conditions in automotive systems.
Supported by our eBIRST Switching System Test Tools
Estimated delivery is 15 to 30 working days
Please contact sales office for availability
This PXI fault insertion switch uses solid state switching elements and is capable of carrying 40A on single channel or 30A on all channels at the same time and provides a robust solution to high current fault insertion.
It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test:
Through relays on each channel enable signals to the UUT to be set open-circuit. Fault Insertion Buses allow any channel to be shorted to any other channel and also enable any channel to be connected to an external signal such as Power, Ignition or Ground to simulate fault conditions. The module is supplied with 2 fault buses.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
|Product Type:||Fault Insertion Switching|
|Switch Type:||Solid State|
|Max I (A):||30|
|Max V DC:||40|
Search our knowledgebase for information on software drivers, product comparisons and technical support for our entire product range.
Because we offer such a large range of products, this tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
We supply and support our products across the globe, with seven offices in the Americas, Europe and Asia as well as additional representation.