The 10-330 High Voltage Switching Modules will Switch up to 3500V with Isolation
to 5000V. Two types are available:4 x Normally Open Reed Relays and 4 x Normally
Closed Reed Relays. The later will always be on in the event of power failure, important
for safety grounding.
The 10-330 high voltage switching module provides the highest voltage capability within System 10.It has 4 x SPST Reed Relays with a choice of Normally Open (-001)or Normally Closed (-101)action.
These units are designed for both “hot ” switching ((close switch after load applied) and “cold ” switching ((close switch before EHT load applied) high voltage applications, giving reliable switching with no disruption to internal logic. Dry reed switches are used in both modules, these provide high reliability with very long life.
Applications for the 10-330 series modules include: transformer testing, circuit board isolation testing, capacitor leakage, relay testing, semiconductor breakdown monitoring and cable harness insulation testing
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
|Max I (A):||0.25|
|Max V DC:||3500|
Search our knowledgebase for information on software drivers, product comparisons and technical support for our entire product range.
Because we manufacture our products in-house, we are able to provide you with guaranteed long-term support and low obsolescence.
We supply and support our products across the globe, with seven offices in the Americas, Europe and Asia as well as additional representation.