Designed to simulate common faults on high-speed two wire communication interfaces such as 1000Base-T1.
Estimated shipping is 20 to 40 working days
Please contact sales office for availability
The 40-203-001 (PXI) and 42-203-001 (PXIe) are designed to simulate common faults on high-speed two wire communication interfaces such as 1000Base-T1. They support 3 channels of two wire serial interfaces. Each channel pair can simulate an open fault in either or both wires, and using the fault bus switches can simulate short between both wires or a short to one of two externally applied fault connections – such as battery supply or ground - via two fault buses.
Each channel can carry up to 0.8 A and is rated up to 100 V between wire pairs. The wire pairs have controlled transmission line impedance suited to most differential signalling systems, including high-speed 1000Base-T1, the fault buses are capable of carrying 0.8 A and also have controlled transmission line impedance. The front panel signal connectors are easy to use MMCX which are fully supported by our range of connector accessories. The module uses high quality reed relays designed for high frequency application with a long service life.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
|Product Type:||Fault Insertion Switching|
|Max I (A):||0.8|
|Max V DC:||100|
Includes full information and specifications
PDF, 861.57 KB
Includes manual, extended specifications, installation instructions and data
PDF, 2.87 MB
Related RF Connector Accessories Datasheet
A complete list and documentation for mating connection accessories
PDF, 565.27 KB
Our worldwide network of partners offers a variety of services from integration to consulting.
Information on software drivers, product comparisons and technical support for our entire product range.
This tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
Find support across the globe, with offices and agents in the Americas, Europe and Asia.