PXI Semi-Dynamic Digital I/O Module, 64-Channel

Overview

The 40-419-001 is a 64-channel digital I/O module suitable for operating external devices, such as power, RF and high voltage relays, solenoids and lamps. It can also be used for interfacing with external logic such as a programmable instrument with a BCD interface depending upon the module’s driving capabilities.

The 40-419 is available with 16, 32, 48 or 64 channels arranged in ports of 8. Each port can be set as 8 inputs or 8 outputs together, as well as setting individual channel as a input or output within a single port. The outputs are capable of driving loads up to 300mA, and can be configured to clamp voltage to internal +3.3 V, +5 V, +12 V or +24 V rails, or to externally supplied rail up to +60 V.

The built in protection systems include over current detection for every channel and an over-voltage clamp so the module can drive relay coils without the use of fly-back diodes.

Connection to the module’s input and outputs is via a 160-pin DIN 41612 front panel mounted plug which is fully supported by a range of connector accessories.

Cable Design Tool

Need special cabling? Try our free online Cable Design Tool—with this tool, you can graphically design your custom cable assembly by using either our built-in library of standard cable sets or create them from scratch. 

Key Features

• 64-Channel I/O (8 Ports of 8 Channels)
• I/O Direction Selection for Each Port/Channel
• Open-Drain Outputs (Low side Driver) for Every Channel
• Up to 60 V External Voltage Clamping Capability for Each Port
• Over Output Current Limitation Detection for Every Channel
• Drivers supplied for Windows and Linux, plus support for Real-time systems
• Supported by PXI or LXI Chassis
• 3 Year Warranty