The 40-419-003 is a 32-channel digital I/O module suitable for operating external devices, such as power, RF and high voltage relays, solenoids and lamps. It can also be used for interfacing with external logic such as a programmable instrument with a BCD interface depending upon the module’s driving capabilities.
The 40-419 is available with 16, 32, 48 or 64 channels arranged in ports of 8. Each port can be set as 8 inputs or 8 outputs together, as well as setting individual channel as a input or output within a single port. The outputs are capable of driving loads up to 300mA, and can be configured to clamp voltage to internal +3.3 V, +5 V, +12 V or +24 V rails, or to externally supplied rail up to +60 V.
The built in protection systems include over current detection for every channel and an over-voltage clamp so the module can drive relay coils without the use of fly-back diodes.
Connection to the module’s input and outputs is via a 160-pin DIN 41612 front panel mounted plug which is fully supported by a range of connector accessories.
Need special cabling? Try our free online Cable Design Tool—with
this tool, you can graphically design your custom cable assembly by using either our built-in library of standard
cable sets or create them from scratch.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
|Product Type:||Digital Input/Output|
|Max I (A):||0.3|
|Max V DC:||60|
Includes full information and specifications
PDF, 621.9 KB
Includes manual, extended specifications, installation instructions and data
PDF, 3.32 MB
Related 160 Pin DIN 41612 Connector Accessories Datasheet
A complete list and documentation for mating connection accessories
PDF, 6.12 MB
|Software Drivers and Downloads for Switching & Simulation Products|
Our worldwide network of partners offers a variety of services from integration to consulting.
Information on software drivers, product comparisons and technical support for our entire product range.
This tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
Find support across the globe, with offices and agents in the Americas, Europe and Asia.