Multiplexer designed for switching the data lines of serial interfaces (RS232, USB)
Estimated shipping is 15 to 30 working days
Please contact sales office for availability
The 40-735 data communications multiplexer is designed for switching the data lines of serial interfaces (RS232, USB). Careful attention to the design of the module ensures that the switching system minimizes its impact on the transmission distance of USB1.1 interfaces.
The MUX is available in 36:1 or 18:1 formats and enables a single source of serial data to be switched to one of 36 or 18 devices under test. This allows the data source to load information to, or receive information from, the device under test. The 36:1 version can be software configured into two independent 18 way MUXs enabling two separate sources of serial data to be connected to separate banks of 18 devices.
The module is ideal for performing bulk testing of any device that relies on a serial data communications port to load software or control the device operation. It can also be used for a variety of other applications where ever a 2-pole low power MUX is required.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
|Max I (A):||0.5|
|Max V DC:||150|
|Max f (MHz):||200|
Search our knowledgebase for information on software drivers, product comparisons and technical support for our entire product range.
Because we offer such a large range of products, this tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
We supply and support our products across the globe, with seven offices in the Americas, Europe and Asia as well as additional representation.