50-201-004
Designed to simulate common faults on high speed two wire communications interfaces.
Supported by our eBIRST Switching System Test Tools
Estimated shipping is 15 to 30 working days
Please contact sales office for availability
This high bandwidth differential PCI fault insertion card is designed to simulate common faults on high speed two wire communication interfaces such as Ethernet. This card supports 4 or 8-channels of two wire serial connections and can be used for simulating faults on Ethernet, AFDX, BroadR-Reach, 100BaseT and 1000BaseT interfaces.
Any wire can be set to an open circuit, shorts can be applied across the wire pair, or to the adjacent pair. Fault connections can be made to one of four external signals via two fault buses, typically simulating connections to a supply voltage or ground.
Each fault bus is capable of carrying 2A allowing multiple channels to be connected to the same fault condition. Additionally, each fault bus features a changeover relay to allow the user to connect alternative fault conditions to the fault buses.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
Product Type: | Fault Insertion Switching |
---|---|
Platform: | PCI |
Switch Type: | EMR |
Fault Buses: | 2 |
Max I (A): | 0.3 |
Max V DC: | 100 |
Channels: | 4 |
PDF Datasheet
Includes full information and specifications PDF, 643.49 KB |
|
PDF Manual
Includes manual, extended specifications, installation instructions and data PDF, 2.88 MB |
|
Related 78 Way D-type Connector Accessories Datasheet
A complete list and documentation for mating connection accessories PDF, 4.16 MB |
Software drivers & downloads for Switching & Simulation Products |
Find CAD 3D Models downloads for products here. |
Kevin manages all of Canada and the following regions in the United States:
Tim manages Latin America and the following states in the United States:
Caden covers the following states in the United States:
Marco covers the following states in the United States:
Mitchell covers the following states in the United States:
Tom manages the following states in the United States:
Jerry manages the following states in the United States:
James manages the following states in the United States:
Our worldwide network of partners offers a variety of services from integration to consulting.
Information on software drivers, product comparisons and technical support for our entire product range.
This tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
Success stories, product videos and more—find the information you need about our switching and simulation.
Find support across the globe, with offices and agents in the Americas, Europe and Asia.
Filter our database of 1000s of products to your exacting specifications.