100-Pin micro-D to 2x50-Pin IDC Ribbon Cable Assembly, Male to Male, 0.5m Long
Estimated shipping is 15 to 30 working days
Please contact sales office for availability
This male to male ribbon 0.5m long cable assembly does not connect directly to Pickering Interfaces products that use the 100-Pin micro-D connector, but customers may find it useful in the development of their own connection solutions. It is constructed from 2 bundles of 50-wire round/flat ribbon cables, terminated with 50-pin male 2.54mm pitch IDC connectors. The 100-pin connector can be secured to its mating connector by male screwlocks.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
|Connector Type (End A):||100-Pin 1.27mm pitch Micro-D|
|Gender (End A):||Male|
|Connector Type (End B):||2 off 50-Pin polarized IDC 0.1 (2.54mm) pitch|
|Gender (End B):||Male|
|Securing Method (End A):||4-40 UNC screwlocks male|
|Securing Method (End B):||Latches|
|Suitable for Pickering Switch Products:||No|
Our worldwide network of partners offers a variety of services from integration to consulting.
Information on software drivers, product comparisons and technical support for our entire product range.
This tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
Find support across the globe, with offices and agents in the Americas, Europe and Asia.