Primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers.
Supported by our eBIRST Switching System Test Tools
Estimated shipping is 15 to 30 working days
Please contact sales office for availability
The Dual Bus, 64 Channel PXI Fault Insertion switch is part of our family of 2 Amp fault insertion solutions, The range includes modules with 74, 64 or 32 channels and single or dual fault buses. This version has normally open through relays, so in the default state, there are no paths between inputs and outputs for any signal channel. It is primarily designed for the simulation of fault conditions in automotive & avionics applications involving the reliability testing of safety critical controllers. It is designed to be able to insert three different fault conditions between the test fixture and the equipment under test:
Through relays on each channel enable signals to the UUT to be held open-circuit. Fault Insertion Buses allow any channel to be shorted to any other channel and also enable any channel to be connected to an external fault condition. The module is available with either one or two fault buses. A 4-channel multiplexer on each bus allows an external signal level such as Power, Ignition or Ground to be selected as the fault condition. Additionally, switched signal lines allow direct monitoring of the fault Buses with a DMM.
eBIRST switching system test tools simplify switching system fault-finding by quickly testing the system and graphically identifying the faulty relay.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
|Product Type:||Fault Insertion Switching|
|Max I (A):||2|
Includes full information and specifications
PDF, 984.82 KB
Includes manual, extended specifications, installation instructions and data
PDF, 4.96 MB
Related 160 Pin DIN 41612 Connector Accessories Datasheet
A complete list and documentation for mating connection accessories
PDF, 5.57 MB
|Software Drivers and Downloads for Switching & Simulation Products|
Search our knowledgebase for information on software drivers, product comparisons and technical support for our entire product range.
Because we offer such a large range of products, this tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
We supply and support our products across the globe, with seven offices in the Americas, Europe and Asia as well as additional representation.