- Industries & Applications
- How to Buy
- Resource Center
- Success Stories
- Articles & White Papers
- Videos and Presentations
- Literature
- Publications
- Newsletters
- Support KnowledgeBase
- Getting Started Guides
- Product Selection Help
- Hardware Topics
- Switching Architectures
- Understanding Tree and Crosspoint Matrix Architectures
- General Purpose Switching Architectures
- Comparing Tree and Conventional MUX Architectures
- How a 2 Pole Matrix Works
- Flexibility of a Dual Bus Architecture
- Expanding a Matrix Size
- Changing Matrix Size 4x4 to 6x1
- Managing screen connections on switch modules
- Stubless Matrix
- Pole Switched Matrices
- PCI Switching Systems
- Switching Platform Selection
- Switching System Specifications
- Relay Reliability
- What Causes Relays to Fail
- Understand Relay Specifications to Get the Most Out of Your Switching System
- Calculating MTBF Figures for a Switching System
- Choose a Reliable Reed Relay Construction
- Finding Relay Failures
- Minimum Switching Capacity in EMR Relays
- Relay End of Life
- Protecting Fault Insertion Relays with Digital I/O
- Understanding PXI Switch Module Current Capacity
- Hot Switching Life of a Reed Relay
- Relay Characteristics
- Fault Insertion Information
- Comparing Solid-State and Relay-based switching for Fault Insertion
- 40-193 and 40-194 Fault Insertion Switching - the Key Technical Difference
- Fault Insertion Switch Architectures
- Fault Insertion Solutions
- Fault Insertion on Serial Interfaces
- Using 40-592A or 40-595A BRICs for Fault Insertion
- Test Panels Utility
- RF Switching Topics
- Selecting an RF Connector
- Why Use Terminated RF Switches?
- Understanding VSWR and Insertion Loss Plots
- Understanding Crosstalk and Isolation Plots
- 40-870 And 40-830 Series RF Architectures
- Calibrating RF Modules with Souriau Connector
- Solid State RF Switching to 6GHz
- RF Level Conversion
- VSWR Interaction
- VSWR to Return Loss
- Power Loss Due to VSWR of Series Switches
- How to Test RF Characteristics of a Switching System
- PXI Instrument and General Instrument Topics
- Managing Battery Simulator Transients
- Using the Voltage Sense Connections on a Power Supply
- 41-610 Arbitrary Waveform Generator
- Arbitrary Waveforms on the 41-620 Function Generator
- Getting More From The 41-650 Amplifier
- PXI Chassis Power Supply Considerations
- Increasing 41-740, 41-742, 41-743 Power Supply Current
- BRIC Large PXI Matrix Topics
- LXI (Ethernet) Specific Pages
- 60-553 LXI Matrix Replacement Procedure
- LXI Standard Version 1.4 Changes
- Information on Pickering LXI Products
- Extending an LXI Chassis
- Diagnosing LXI Problems
- LXI Simulator
- Using Expect with SSH on an LXI Device
- LXI Device Data Erasure in Secure Environments
- RS232 Control of LXI Devices
- SSH Control of LXI Devices
- LXI SOAP Interface
- Using the LXI SOAP Interface from LabView
- LXI Article 1 - Driving LXI
- LXI Article 2 - Security in the LXI Environment
- LXI Article 3 - Introducing LXI to your IT Department
- Using an LXI product in LabVIEW
- Controlling an LXI Device from USB
- Using Pickering Switches from Perl
- Find LXI Cards discovery error
- LXI Advantages in Switching Systems
- LXI Discovery
- LXI Software Drivers
- Pickering LXI Simulator Tools
- LXI Success Stories
- Programmable Resistor Module Tech Articles
- Importance of Thermoelectric EMF in resistor simulators
- Resistor card transient values
- Increasing the Power or Voltage Handling of Resistor Modules
- Platinum Temperature Sensors
- Strain Gauges
- Accuracy of Resistor Modules
- External Voltage on Resistor Modules
- Potentiometer Emulation
- Temperature Stability of Resistor Modules
- Extending the Resistance range of a Precision Resistor Module
- Resistance Measurements with a DMM
- Specification and Test
- Digital IO
- Cable and Connector Topics
- Bringing USB to PXI Systems
- Power Distribution MUX Using 40-500 Matrix
- Pickering Card Topology
- Arbitrary Waveform Generation Topics
- What is the Thermoelectric Effect
- Increasing 41-740, 41-742, 41-743 Current
- Switching Architectures
- Software Topics
- Switch Path Manager Signal Routing Software
- Diagnostic Test Tools - eBIRST and BIRST Information
- Using Pickering Switches in Various Programming Languages
- PXI Software Drivers
- LXI Software Drivers
- LXI Simulation Products
- Documentation
- Programming Language Examples
- Windows 7 Compatibility
- Linux Drivers
- IVI Driver Information & Downloads
- Driver Status Codes
- GhostCard Library
- Software Drivers and Downloads
- Driver Downloads
- Driver Download Diagrams for PCI & PXI
- PXI/PCI Software Drivers
- Software Driver Downloads For Modules 41/51
- VISA Drivers
- Using PILPXI
- VXI Software Drivers
- RS232 and IEEE-488 Software Drivers
- SIMRC Software Drivers
- Available articles on the .NET Driver
- Pickering Driver Error Codes
- Using Pickering Cards in LabWindows/CVI Real Time
- Other Software Pages
- Programming a 40-265 Strain Gauge card in LabView
- What is the purpose of Switching & Routing Software?
- Software Landing Page
- Utility Software Downloads
- Software Getting Started Guides
- National Instruments Software Compatibility
- Python and Pickering Products
- VISA Status Codes
- Pipx40 and LabViewRT
- Software Programming Languages
- New PILMon Command Set
- PILMon
- Using Pickering drivers in ATEasy
- Using Pickering Cards in VEE
- Pickering Drivers in Visual Studio
- Identifying a Pickering PXI Chassis in NI MAX
- Setting a 40-296 Potentiometer
- SOAP Library Reference
- Driver pages
- IVI Driver Models List
- Accessing Pickering Drivers from Python
- Accessing Pickering LXI driver using Python
- PIPX40 VISA Driver
- Pickering GhostCard driver example
- Using The .NET Driver In Visual Studio C#
- Using Pickering LXI Products from NI RT Systems
- Using Pickering Drivers in LabWindows/CVI
- Using Matlab with Pickering PXI Direct IO drivers
- Using Matlab with Pickering LXI drivers
- Using MATLAB with Pickering VISA Driver
- MATLAB Landing Page
- What driver?
- Pickering Drivers in Visual Studio
- Using Pickering Drivers in LabView
- Pickering Drivers in C/C++
- How to Setup MAX to use Pickering's Switches with NI Switch Executive
- Support Pages on Known Issues
- Understanding the Diagnostic Report
- Fault Finding Tree
- LXI Discovery Problems
- Keysight (Agilent) GPIB
- NI MAX PXI Chassis Configuration Problem
- Problems with PC BIOS Settings
- Hard Disc Drive Compatibility With Relays
- Root Certificate Update (Windows XP)
- Installing and Troubleshooting Pickering PXI Cards under Windows
- Support Request
- Other Knowledgebase Articles
- About Us
LXI High Density 512x8 2-Pole 2A Matrix With BIRST
60-555-028
High-density double pole matrix suitable for signal routing in large ATE systems.
Supported by our Diagnostic Test Tools:
BIRST and eBIRST
Estimated delivery is 20 to 30 working days
Please contact sales office for availability
- $53,660
Overview
High density double pole matrix capable of switching up to 300VDC/250VAC, or 2A (60W max). The use of high quality electro-mechanical relays offer high switching confidence and make it suitable for signal routing in large ATE systems.
It is constructed from 64x8 sub assemblies, permitting the matrix to be supplied in a variety of sizes from
128 x 8 to 512 X 8. Larger sizes can be easily achieved by linking multiple units together, for instances two
512x8 units can be linked to create a 1024x8 matrix.
These units are supported by our Diagnostic Test Tools:
Key Features
- Up to 4096 crosspoints
- Dual analog bus
- Matrix size 192x8 to 512x8
- Uses high quality electro-mechanical relays
- Switch up to 300VDC/250VAC and up to 60W max power
- Maximum switch current of 2A
- 1U rack mountable enclosure
- LXI Standard 1.4 compliant
- IVI and Direct I/O drivers
- Supported by our Diagnostic Test Tools
- 3 year warranty
Product specifications
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
| Product Type: | Matrices |
|---|---|
| Platform: | LXI |
| Switch Type: | EMR |
| X Size: | 512 |
| Y Size: | 8 |
| Max I (A): | 2 |
| Max V DC: | 300 |
| Poles: | 2 |
| Banks: | 1 |
| No Of Poles: | 2 |
Downloads
|
PDF Datasheet
Includes full information and specifications PDF, 3.26 MB |
|
|
PDF Manual
Includes manual, extended specifications, installation instructions and data PDF, 5.32 MB |
|
|
Related 160 Way DIN 41612 Connector Accessories Datasheet
A complete list and documentation for mating connection accessories PDF, 5.25 MB |
| Software Drivers and Downloads for Switching & Simulation Products |
Tim manages the following states in the United States:
- AZ, AR, CA, CO, HI, ID, LA, MT, NV, NM, OK, TX, UT, WY
Kevin manages the following states in the United States:
AK, CT, DE, IL, IN, IA, KS, KY, ME, MD, MA, MI, MN, MO NE, NH, NJ, NY, ND, OH, OR, PA, RI, SD, VT, VA, WA, DC, WV, WI
He also manages Canada
Bill manages the following states in the United States:
- AL, FL, GA, MS, NC, PR, SC, TN,
Languages: English and Spanish
Also in this Range
Related Products
Need help?
Knowledgebase
Search our knowledgebase for information on software drivers, product comparisons and technical support for our entire product range.
Product Selector
Because we offer such a large range of products, this tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
Resource center
From success stories and product videos,
to product literature and newsletters, find the information you need about our switching and simulation
solutions.
Worldwide presence
We supply and support our products across the globe, with seven offices in the Americas, Europe and Asia as well as additional representation.
