The MS-M RF 26-Pin cable assembly is constructed from RG178 Silver Plated Copper Clad Steel Wire with PVC insulation and an attenuation of 1.08dB/m at 400MHz. Screwlocks are provided to secure the MS-M connector to the associated product.
40-979-526: For use with any MS-M product, when used on some connectors there may be spare leads which do not connect to the RF product.
40-979-525: For use with 40-755 where 25 connections are required and with the LOWER CONNECTOR BANK B connection of the 40-754 where 25 connections are required.
40-979-524: For use with 40-754 connector that supports 8 off SPDT switches.
40-979-503: For use with 40-754 connector that supports 1 off SPDT switch.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
|Connector Type (End A):||MS-M RF (26-Pin)|
|Gender (End A):||Female|
|Connector Type (End B):||SMB|
|Gender (End B):||Female|
|Securing Method (End A):||6-32 UNC screwlocks|
|Securing Method (End B):||Push Fit|
|Suitable for Pickering Switch Products:||Yes|
Search our knowledgebase for information on software drivers, product comparisons and technical support for our entire product range.
Because we offer such a large range of products, this tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
We supply and support our products across the globe, with seven offices in the Americas, Europe and Asia as well as additional representation.