Intended for routing simulated fault conditions in automotive and aerospace applications involving the reliability testing of safety critical controllers.
Supported by our eBIRST Switching System Test Tools
Estimated shipping is 20 to 40 working days
Please contact sales office for availability
This 34-channel fault insertion switch is primarily intended for routing simulated fault conditions in automotive and aerospace applications involving the reliability testing of safety critical controllers. A low cost 16-channel option is also available.
Designed to route different fault conditions between the test fixture and the equipment under test, including:
Through relays on each channel enable signals to the UUT to be held open-circuit. Fault Insertion Buses allow any channel to be shorted to any other channel and also enable any channel to be connected to an external fault condition. The module has four fault buses that allow an external signal level such as power, ignition and ground to be inserted as a fault condition.
For further flexibility, each fault bus includes a changeover switch to select one of two fault conditions. The default state of the unit is with all through relays closed and all fault insertion relays open, giving an un-interrupted path between the test fixture and the equipment under test.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
|Product Type:||Fault Insertion Switching|
|Max I (A):||2|
|Max V DC:||300|
PDF Data Sheet
Includes manual, extended specifications, installation instructions and data
PDF, 867.09 KB
Includes full information and specifications
PDF, 3.4 MB
|Software drivers & downloads for Switching & Simulation Products|
|Find CAD 3D Models downloads for products here.|
Our worldwide network of partners offers a variety of services from integration to consulting.
Information on software drivers, product comparisons and technical support for our entire product range.
This tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
Success stories, product videos and more—find the information you need about our switching and simulation.
Find support across the globe, with offices and agents in the Americas, Europe and Asia.
Filter our database of 1000s of products to your exacting specifications.