PXI Differential Fault Insertion Switch Modules

Fault Insertion Modules for Two Wire Serial Interfaces

  • Fault Insertion Modules for Two Wire Serial Interfaces
  • Choice of Channel Counts and Switch Configurations
  • Controlled Transmission Line Impedance
  • Kernel, VISA and IVI Support For PXI Environments & Kernel and IVI Support For LXI Environments
  • Modules are supported by our eBIRST Switching System Test Tools, these tools provide a quick and simple way of finding relay failures within LXI, PCI and PXI switch systems.

Pickering's PXI Differential Fault Insertion Switch Modules support multiple channels of two-wire serial interfaces. Each channel can simulate an open fault in either or both wires, a short between both wires or a short to externally applied fault conditions. Two module types are available:

  • Two wire fault insertion module suitable for CAN Bus and FlexRay.
  • High bandwidth two wire fault insertion module suitable for Gigabit Ethernet, AFDX and BroadR-Reach.

We also offer mating cables and connectors for these modules to ensure speedy and successful system integration.

Fault Insertion Serial Interfaces
Untitled Button
Switch Type
Max I (A)
Max V DC
Channels
Fault Buses
Price

40-200A-004

PXI/PXIe Fault Insertion Switch, CAN/FlexRay/Differential Bus, 4 Channel

Designed to simulate common faults on two wire communications interfaces. Supported by our eBIRST Switching System Test Tools

Switch Type
EMR
Max I (A)
0.3
Max V DC
100
Channels
4
Fault Buses
4
Product Type
Fault Insertion Switching
Platform
PXI/PXIe
¥287,900

40-205-900-800

Interface Board For 10GBase-T1 Ethernet Fault Insertion Switch

Interface Board/Breakout Box for 40/42-205 10GBase-T1 Ethernet Fault Insertion Switch.

Product Type
Fault Insertion Switching
¥412,700

Design and Visualise Test System Signal Paths

Bring system configuration, schematic design, cable design and product selection into a single, cohesive workflow for test system development.

Start designing

Design and Visualise Test System Signal Paths

Design test system switching and signal routing.

40-205-901-800

Interface Board For 10GBase-T1 Ethernet Fault Insertion Switch, Rack Mount

Interface Board/Breakout Box for 40/42-205 10GBase-T1 Ethernet Fault Insertion Switch - Rack mounted version

Product Type
Fault Insertion Switching
¥412,700

40-203-900-600

Interface Board For 1000GBase-T1 Fault Insertion Switch, 6-Channel, Desk Top

Interface Board/Breakout Box for 40/42-203-002 1000GBase-T1 Fault Insertion Switch - desk top version.

Product Type
Fault Insertion Switching

40-203-901-600

Interface Board For 1000GBase-T1 Fault Insertion Switch, 6-Channel, Rack Mounted

Interface Board/Breakout Box for 40/42-203-002 1000GBase-T1 Fault Insertion Switch - rack mounted version.

Product Type
Fault Insertion Switching

40-203-901-300

Interface Board For 1000GBase-T1 Fault Insertion Switch, 3-Channel, Rack Mounted

Interface Board/Breakout Box for 40/42-203-001 1000GBase-T1 Fault Insertion Switch - rack mounted version.

Product Type
Fault Insertion Switching

40-203-900-300

Interface Board For 1000GBase-T1 Fault Insertion Switch, 3-Channel, Desk Top

Interface Board/Breakout Box for 40/42-203-001 1000GBase-T1 Fault Insertion Switch - desk top version.

Product Type
Fault Insertion Switching

40-204-001

PXI/PXIe 1000Base-T1 Dual Multiplexer With Fault Insertion, Single Channel

Designed to simulate common faults on high-speed two wire communication interfaces such as 1000Base-T1.

Switch Type
EMR
Max I (A)
0.8
Max V DC
200
Channels
1
Fault Buses
2
Product Type
Fault Insertion Switching
Platform
PXI/PXIe
¥320,000

40-201-004

Ethernet/AFDX/BroadR-Reach PXI Fault Insertion Switch - 4 Channel

Designed to simulate common faults on high speed two wire communications interfaces. Supported by our eBIRST Switching System Test Tools

Switch Type
EMR
Max I (A)
0.3
Max V DC
100
Channels
4
Fault Buses
2
Product Type
Fault Insertion Switching
Platform
PXI
¥328,900

40-201-008

Ethernet/AFDX/BroadR-Reach PXI Fault Insertion Switch - 8 Channel

Designed to simulate common faults on high speed two wire communications interfaces. Supported by our eBIRST Switching System Test Tools

Switch Type
EMR
Max I (A)
0.3
Max V DC
100
Channels
8
Fault Buses
2
Product Type
Fault Insertion Switching
Platform
PXI
¥409,100

40-200A-008

PXI/PXIe Fault Insertion Switch, CAN/FlexRay/Differential Bus, 8 Channel

Designed to simulate common faults on two wire communications interfaces. Supported by our eBIRST Switching System Test Tools

Switch Type
EMR
Max I (A)
0.3
Max V DC
100
Channels
8
Fault Buses
4
Product Type
Fault Insertion Switching
Platform
PXI/PXIe
¥405,600

40-204-002

障害挿入機能搭載PXI/PXIe 1000Base-T1 デュアル・マルチプレクサ、2チャネル

1000Base-T1などの高速2線通信インターフェース上での一般的な障害のシミュレーション向け

Switch Type
EMR
Max I (A)
0.8
Max V DC
200
Channels
2
Fault Buses
2
Product Type
Fault Insertion Switching
Platform
PXI/PXIe
¥435,000

40-203-001

PXI/PXIe 1000Base-T1 障害挿入スイッチ、3チャネル

1000Base-T1などの高速2線通信インターフェース上での一般的な障害のシミュレーション向け

Switch Type
Reed
Max I (A)
0.8
Max V DC
100/200
Channels
3
Fault Buses
2
Product Type
Fault Insertion Switching
Platform
PXI/PXIe
¥697,000

40-205-004

PXI/PXIe 10GBase-T1 Ethernet MEMS Fault Insertion Switch, 4 Channel

Designed to simulate common faults on high-speed two wire communication interfaces such as 10GBase-T1 Ethernet.

Switch Type
MEMS
Max I (A)
0.5
Max V DC
100
Channels
4
Fault Buses
2
Product Type
Fault Insertion Switching
Platform
PXI/PXIe
¥1,099,000

40-203-002

PXI/PXIe 1000Base-T1 Fault Insertion Switch, 6-Channel

Designed to simulate common faults on high-speed two wire communication interfaces such as 1000Base-T1.

Switch Type
Reed
Max I (A)
0.8
Max V DC
100/200
Channels
6
Fault Buses
2
Product Type
Fault Insertion Switching
Platform
PXI/PXIe
¥929,600

40-205-008

PXI/PXIe 10GBase-T1 Ethernet MEMS Fault Insertion Switch, 8 Channel

Designed to simulate common faults on high-speed two wire communication interfaces such as 10GBase-T1 Ethernet.

Switch Type
MEMS
Max I (A)
0.5
Max V DC
100
Channels
8
Fault Buses
2
Product Type
Fault Insertion Switching
Platform
PXI/PXIe
¥1,830,700

Filter

Switch Type

EMR - Electro-Mechanical Relay, cost-effective, medium power switching. Reed - reed relays, excellent low-level switching, fast, long life. Solid-State - very fast, indefinite life, high power switching, but high leakage and insertion loss.

Max I (A)

Maximum continuous current each switch can carry.

Max V DC

The maximum voltage that may be applied to each switch.

Channels

The number of discrete channels in a single topology.

Fault Buses

The number of external fault conditions that may be applied to each channel.

Loading
ベータ版

How can I help?

Hi , I'm TESS - your friendly AI agent

Press Enter to submit

TESS is a moderated, AI agent. TESS can make mistakes, please verify important information independently.


Chat history

Log in or create an account to save & continue your chats with TESS.

Log in

or create an account