Pickering VISA driver (pipx40) and Real-Time Operating Systems
RT system with Phar Lap ETS Real-Time Operating System
The Pickering VISA driver, pipx40, is suitable for use with LabVIEW RT systems
Below are the instructions on how to install the driver.
Step 1: Install Pickering PXI-Driver-Package as pipx40 onto the development system
Link: https://downloads.pickeringtest.info/downloads/drivers/PXI_Drivers
Step 2: Copy the LabVIEW Library
Ensure that the pipx40 LabVIEW library is copied to the `instr.lib` directory of your LabVIEW installation. This library is essential for the driver to function properly within LabVIEW.
Step 3: Transfer INF Files
Step 4 : Transfer the pipx40_32.dll:To allow your RT system to recognize Pickering cards, you will need to transfer the Windows INF files. Perform the following actions:
Source C:\Program Files (x86)\IVI Foundation\VISA\WinNT\pipx40\LabVIEW RT\*.inf Destination /ni-rt/system
Depending on the version of your driver, transfer the appropriate version of `pipx40_32.dll` as follows:
Before v5.19.001
Source C:\Program Files (x86)\IVI Foundation\VISA\WinNT\bin\pipx40_32.dll Destination /ni-rt/system
Note: On older installations, the source files may be located in: C:\VXIPNP\WinNT folder system
After v5.19.001
Source C:\Program Files (x86)\Pickering Interfaces Ltd\NI Phar Lap\pipx40_32.dll Destination /ni-rt/system
Note: For driver versions from v5.03.001 to v5.18.003 you might observe
“Error loading ‘pipx40_32.dll’ : Missing export ‘GetProcessId’ from ‘KERNEL32.DLL’”
Kindly contact [email protected] for a custom patch to fix this issue.
RT system with NI Linux Real-Time Operating System
Before installing the Pickering PXI VISA (pipx40) driver on a remote system running NI Linux RT, the following prerequisites must be met:
- LabVIEW and the LabVIEW RT module are installed on your local system with the Pickering Pipx40 wrapper
- The target system is connected to the local area network with SFTP/SSH access
- LabVIEW RT and NI VISA area already installed on the target system
Installation step:
- Download the latest driver version for “pipx40 for NI Linux RT” from https://downloads.pickeringtest.info/downloads/drivers/Linux_Drivers/
- Copy the file to the target system.
- Login to the target system, and navigate to the location where the driver file was copied.
- Extract the tar.gz file.
# tar zxvf [installation package tar.gz file]
- Navigate to the extracted folder.
- Run the install script
# sh install.sh
This will install the Pickering Pipx40 PXI VISA driver files and .inf files for NI VISA to recognize Pickering cards.