Managing Screen Connections on Switch Modules
This page explains how to manage screen connections on switch modules designed to reduce noise in test systems. The use of screens, as opposed to coaxial setups grounded at both ends, is a topic of ongoing debate among engineers. Many EMC engineers argue that relying on screens may point to underlying design flaws in a system. On the other hand, systems engineers often face challenges with ground loops when multiple grounds are connected in complex systems. While this page provides guidance on screen management, it does not take a stance on the debate.
Screen organization
Configurations featuring screened relays provide separate screen connections accessible via the user connector. In matrices, these screens are interconnected but remain isolated from the ground. For multiplexers with multiple poles or banks, each pole or bank is equipped with its own screen, which is individually routed to the user connector. In general-purpose switches, the screens are kept independent and are also made available through the user connector.
Connecting the Screen
To connect the screen effectively, choose the method best suited to your application.
For optimal bandwidth (BW) performance, we recommend connecting the screen to the front panel ground. This approach eliminates any ungrounded screens, which could otherwise affect the transmission line impedance of the wiring and the switch module.
In certain applications, especially where ground loops might occur, users may prefer to connect the screen to an external
ground linked to either the instrumentation or the UUT within the system.
To preserve bandwidth and eliminate low-frequency ground loops, the screen can be capacitively coupled to the module's front panel ground. However, the capacitor's inductance plays a critical role in its effectiveness as a high-frequency ground connection, potentially causing resonances at certain frequencies. Despite this limitation, it successfully breaks ground loops at low frequencies (such as 50, 60, or 400 Hz), which are typically the most common sources of interference.
Bandwidth Effects: Transmission Line or Screen?
A common point of confusion for users is understanding the difference between a transmission line and a screen.
In the case of a transmission line, the "screen" serves a specific purpose: it establishes a defined transmission line impedance and is connected to an RF ground at both ends.
A screen, on the other hand, does not provide a defined impedance. It may be grounded at only one point, and in the context of a switching module, it is typically not grounded within the module itself. This lack of grounding can turn the screen into a resonant structure. The longer the ungrounded section of the screen (including its extension within the switching module), the lower the resonance frequency, potentially impacting system performance.
Establishing Ground Connections
Some modules provide a front panel ground via the user connector, while others allow grounding through the connector shell.
It is strongly advised not to leave screens ungrounded, as this can compromise isolation, increase crosstalk, and create unintended RF structures that may disrupt the system's frequency response.