Startups building unmanned aerial vehicles (UAVs) face immense pressure to deliver reliable and safe platforms on tight budgets. Hardware engineering teams often rely on manual benchtop testing to validate flight controls, power systems, and communication payloads. Manual testing scales poorly as system complexity grows. Transitioning to automated or semi-automated testing ensures safety and regulatory compliance without demanding enterprise-level capital investments.

This guide outlines seven frequent missteps engineers make during UAV testing. It also provides practical solutions based on the strengths of modular hardware and scalable software architectures to help you bridge the gap between basic benchtop testing and fully automated test equipment.

1. RELYING EXCLUSIVELY ON MANUAL BENCHTOP TESTING

Many small companies start by manually probing circuits and reading multimeters to verify drone subsystems. This approach works for early prototypes but quickly becomes a bottleneck. Manual testing introduces human error, lacks traceability, and makes regression testing nearly impossible when software updates occur.

The Solution: Adopt a Modular Test Architecture (i.e., LXI/PXI)

You do not need a massive, expensive test rack to automate your processes. The best practice is to deploy a scalable, modular system. Starting with a compact LXI chassis and industry-standard PXI switching and simulation modules provides a cost-effective middle ground to meet your current testing needs and scale into a full Hardware-in-the-Loop (HIL) system in the future. This type of setup connects directly to your host PC via Gigabit Ethernet and enables you to run automated test scripts that can accurately and repeatedly emulate various flight conditions.

2. NEGLECTING PROACTIVE OBSOLESCENCE MANAGEMENT

Small companies often try to save money by building custom, proprietary test boxes or buying highly specific standalone instruments. Two or three years later, the components inside those custom boxes become obsolete. The company is then forced to redesign the entire test architecture from scratch, wasting time and engineering resources.

The Solution: Standardize on Open Industry Architectures

The most effective way to protect your investment is through proactive obsolescence management. By standardizing on open platforms such as PXI and LXI, you ensure long-term support and flexibility. When a specific instrument or switch reaches the end of its lifecycle, you simply slide the obsolete module out of the chassis and replace it with a newer, compatible version. The rest of your hardware and software investment remains intact. This scalability ensures that your test system can grow organically from a small benchtop setup into a fully automated production rack as your startup matures into a large-scale manufacturer. Choosing the right vendor is equally important to minimize long-term maintenance. Redesigning test architectures because of test equipment obsolescence can consume valuable engineering time and significantly increase costs.

3. IGNORING FAULT TESTING

UAV flight controllers process data from hundreds of inputs, including gyroscopes, accelerometers, temperature probes, and pressure transducers. Testing these sensors in a static environment fails to predict how the drone will react in flight if a sensor fails or degrades.

The Solution: Integrate Fault Insertion and Sensor Simulation

To validate flight-critical fail-safe mechanisms, you must simulate the dynamic behavior of these sensors and intentionally inject faults. PXI fault insertion units (FIUs) are designed for this exact purpose. By routing sensor signals through an FIU, you can automate the injection of open circuits, short circuits, and unexpected resistance changes into the signal path. Coupling this with PXI resistance modules enables automated sensor calibration and the dynamic simulation of RTDs or thermistors. This ensures your flight controller can handle catastrophic hardware failures without causing a drone crash.

4. NEGLECTING GNSS TESTING

Autonomous UAVs depend heavily on accurate positioning and timing data for navigation, waypoint tracking, return-to-home functions, and mission execution. GNSS vulnerabilities such as spoofing, jamming, signal degradation, and multipath interference can pose major operational and safety risks. Validating performance across multiple satellite constellations—including GPS, GLONASS, Galileo, and BeiDou—is essential to ensure reliable operation in contested or degraded environments.

The Solution: Automate RF and Microwave Signal Routing

Validating autonomous navigation systems requires automated RF testing that can simulate real-world GNSS conditions, interference, and attack scenarios. UAV test engineers must route signals between the DUT, GNSS simulators, spectrum analyzers, and signal generators to evaluate navigation performance under varying conditions. PXI microwave switching modules enable fast, repeatable RF signal routing with low insertion loss and high isolation for accurate high-frequency measurements. This modular approach allows engineers to automate validation routines across multiple frequency bands, signal strengths, and simulated interference conditions, improving test coverage, repeatability, and confidence in flight reliability.

5. OVERLOOKING SIGNAL INTEGRITY

Modern UAVs combine high-current electronic speed controllers (ESCs), brushless motors, RF communication systems, GPS modules, and sensitive avionics within an extremely compact airframe. This dense electrical environment creates common development challenges, including electromagnetic interference (EMI), crosstalk, noise, and grounding issues. Manually tracing intermittent signal integrity problems across multiple subsystems can consume significant engineering time and delay flight-test readiness.

The Solution: Deploy a Shielded, High-Density Switching Architecture with Flexible Ground Referencing

A high-density PXI switching architecture enables UAV test engineers to automatically route hundreds of avionics, sensor, power, and communication signals to oscilloscopes, DAQs, and RF instruments without constant manual reconfiguration. To maintain measurement accuracy, select switching modules with robust shielding, high channel-to-channel isolation, and low noise to minimize interference between sensitive signals.

Because UAV platforms often operate across multiple voltage domains and grounding schemes, configurable reference grounding is equally important to reduce the risk of ground loops and corrupted measurements. Signal integrity also depends heavily on the quality of the interconnect system. High-performance cables are critical for maintaining reliable measurements across high-speed digital buses, RF links, and low-level sensor signals. In many UAV test environments, custom cabling is required to interface the DUT with PXI instrumentation and environmental test equipment. The electrical performance and documented quality of these cables directly impact measurement accuracy, EMC compliance, and confidence in overall system validation results.

6. SKIPPING ENVIRONMENTAL STRESS SCREENING IN TEST ROUTINES

Drones operate in harsh environments. They experience extreme temperature fluctuations at high altitudes and severe mechanical vibrations during flight. Testing a UAV purely at room temperature leaves you blind to solder joint failures, component drift, and structural weaknesses.

The Solution: Connect Automated Test Equipment to Environmental Chambers

Environmental stress screening must be an integral part of your validation process. You can place your UAV components inside a thermal chamber and run long-term automated tests. Modular PXI switching systems are ideal for this application because they allow you to route stimulus and measurement signals into the chamber continuously. You can monitor the performance of the flight controller, power distribution board, and payload while the chamber cycles from sub-zero temperatures to extreme heat. This continuous automated monitoring identifies intermittent faults that only appear under thermal stress.

7. OMITTING COMPREHENSIVE BATTERY MANAGEMENT SYSTEM VALIDATION

Modern UAVs rely on high-density battery packs to maximize flight time and payload capacity. The Battery Management System (BMS) is a critical safety component. Engineers often test the BMS using actual batteries, which is dangerous, slow, and incapable of safely simulating extreme failure modes such as thermal runaway or deep discharge.

The Solution: Utilize PXI Battery Simulator Modules

Effective BMS validation requires precise control over individual cell voltages. The safest and most efficient method is to replace real batteries with modular battery simulators during the test phase. PXI battery simulator modules allow you to emulate multi-cell battery packs with high accuracy. A six-cell battery simulator module provides high isolation and allows you to emulate a battery pack of up to 100 cells when stacked. This enables you to programmatically simulate over-voltage, under-voltage, and cell imbalance conditions to verify that the BMS responds correctly to critical faults.

Beta

How can I help?

Hi , I'm TESS - your friendly AI agent

Press Enter to submit

TESS is a moderated, AI agent. TESS can make mistakes, please verify important information independently.


Chat history

Log in or create an account to save & continue your chats with TESS.

Log in

or create an account