Designing automated test systems for the rail industry comes with unique challenges, the most significant of which is the issue of obsolescence. With electrified rail systems often boasting operating lifespans of 20 to 30 years—or longer—it’s inevitable that some components of these systems become outdated during their service life. Due to the pace at which electronics and software evolve, automated testing systems ensure critical maintenance and operational verification are especially susceptible to this problem.

This article will explore how obsolescence impacts testing in the rail industry, why modular systems such as PXI and LXI are ideal solutions to this issue, and what actionable steps test engineers can take to future-proof their automated systems. 

The Challenge: Obsolescence in Rail Testing Systems

The rail industry is built on longevity. Rail infrastructure, rolling stock, and control systems are engineered for decades of use. Automated test systems in this context must match the same level of durability, operating without fail to ensure safety and compliance with evolving standards. However, the lifespan of the components that make up these test systems—such as hardware, software, and connectivity protocols—doesn’t align with the rail industry’s extended lifecycles.

Here’s why obsolescence is such a persistent issue in rail industry testing:

  • Longevity of Rail Equipment: Typically, rail systems last 30 or more years, so testing systems need to factor obsolescence management heavily into their overall test strategy.
  • Rapid Technological Advancements: Electronics and software used in testing evolve much faster than rail equipment. For instance, a core controller in an automated test system may become outdated within 5-10 years, long before the rail system itself is retired. Manufacturers may discontinue older components, leaving engineers with outdated or unsupported hardware.
  • Difficulty in Backward Compatibility: Many older test systems—like cPCI & VMEbus—were designed to operate in isolated environments with proprietary protocols. This complicates their integration with modern equipment and advancements in communication standards.
  • Cost of System Overhaul: Replacing an entire test setup every 10-15 years to address obsolescence is not economically viable, especially in an industry constrained by tight budgets. However, manual maintenance and testing cannot fully replace automated systems without additional costs and risks to safety.

The Solution: Modular Automated Test Systems

To mitigate the challenges of obsolescence, modular automated testing systems, such as those built using PXI (PCI eXtensions for Instrumentation) and LXI (LAN eXtensions for Instrumentation) platforms, emerge as an ideal choice for the rail industry. Unlike monolithic test solutions, modular systems are designed with flexibility and longevity in mind, making them better suited to address the dynamic needs of automated rail testing.

What is PXI? PXI is an open, modular instrumentation platform designed for measurement and automation systems. It combines the PCI electrical-bus standard with industrial-grade connectors and hardware, ensuring robust, high-speed data processing. 

Download our PXImate book here 

What is LXI? LXI is a standardized communication platform for test instrumentation based on Ethernet. It simplifies networking, making integrating multiple instruments without complex configuration easy. 

Download our LXImate book here

Why Choose Modular Systems?

1. Ease of Upgrading Individual Components: Modular systems allow individual components—such as data acquisition modules, power supplies, or controllers—to be replaced or upgraded without overhauling the entire testing system. For instance:

  • When a PXI controller becomes obsolete, engineers can replace it without disturbing the I/O modules or the software framework.
  • LXI instruments effortlessly integrate with modern communication protocols, extending their functionality far beyond their original setup.
2. Scalability for Future Needs: Rail projects evolve over decades. Modular systems can scale to accommodate new requirements, such as handling different communication standards (for example, increased adoption of Ethernet/IP in signaling systems) or testing subsystems for electric rail vehicles.

3. Interoperability with Mixed Vendors: Both PXI and LXI platforms adhere to industry standards, enabling integration with instruments from different manufacturers. Test engineers aren’t locked into a single vendor’s ecosystem, which reduces the risk of equipment becoming obsolete due to proprietary constraints.
4. Reduced Total Cost of Ownership: While modular systems require a higher initial investment than some fixed-purpose alternatives, their long-term costs are significantly lower. The ability to swap out modules, upgrade incrementally, and repurpose instrumentation leads to greater cost efficiency over time.
5. Streamlined Maintenance and Support: Modular testing systems simplify maintenance by standardizing components. PXI’s and LXI’s broad industry adoption ensures long-term availability of parts and third-party support, reducing downtime when replacing or repairing obsolete modules.

Key Use Cases for Modular Testing in Rail Operations

Modular automated testing systems are already disrupting traditional rail testing processes in several domains. Below are three examples of their applications:

  1. Signaling Systems: Signaling verification is critical to rail safety. Modular platforms can simultaneously test legacy signaling equipment and modern systems like Communication-Based Train Control (CBTC), European Train Control System (ETCS), Train Control and Management System (TCMS), and Automatic Train Control (ATC) Systems, accommodating the transition period between old and new technologies.
  2. Energy Efficiency Testing for Electrified Rail: With rail operators pursuing efficiency, testing systems need to support the latest energy monitoring protocols and load simulation technologies. PXI-based systems excel here by delivering ultra-fast data acquisition and analysis, enabling accurate modeling and simulation.
  3. Compliance Testing for International Standards: Rail systems, especially those operating in multiple countries, must comply with rigorous international safety standards. LXI’s Ethernet-based connectivity ensures standardized compliance testing setups can easily be deployed, reconfigured, and updated across locations.

Future-Proofing Your Automated Testing System

Ensuring a rail system remains safe and functional across decades requires careful planning. Here’s a roadmap for test engineers and program managers to future-proof their automated testing efforts:

  1. Adopt Standardized Platforms: PXI and LXI platforms are designed for longevity and interoperability. Prioritize solutions built on these standards to prepare for future needs.
  2. Establish Clear Upgrade Cycles: Create a roadmap for periodically updating hardware and software to avoid unexpected obsolescence.
  3. Implement Virtualization: Virtualizing testing environments reduces dependencies on physical hardware, extending the lifespan of legacy test programs.
  4. Engage with Manufacturers and Vendors: Work closely with test equipment suppliers to track product lifecycles and availability. Vendors like Pickering that commit to long-term PXI/LXI support will be invaluable.
  5. Document Test Programs: Comprehensive documentation of test system configurations and software code will simplify the process of migrating to newer systems.

Designing the Next Generation of Reliable Rail Systems

Obsolescence doesn’t have to derail rail systems' operations and safety. By leveraging modular automated testing systems built on PXI and LXI platforms, test and rail engineers can efficiently adapt to the demands of extended lifecycles. These solutions offer the durability, flexibility, and compatibility that the rail industry demands, ensuring smooth operations and regulatory compliance for decades to come.

For rail engineers, test managers, and QA professionals, now is the time to prioritize modular approaches. Building resilient systems today will prepare the rail industry for tomorrow's challenges.

Curious to learn more?

Start exploring PXI and LXI solutions, and ensure your automated testing is ready to stand the test of time.

Discover more about our automotive and transportation solutions here.

Have questions? Contact us to learn more.

Beta

How can I help?

Hi , I'm TESS - your friendly AI agent

Press Enter to submit

TESS is a moderated, AI agent. TESS can make mistakes, please verify important information independently.


Chat history

Log in or create an account to save & continue your chats with TESS.

Log in

or create an account