PXI Analog Output
PXI analog output modules are precision voltage and current sources that let a test system generate the analog signals a device under test (DUT) expects to receive. Engineers use them to simulate sensors and transducers, such as thermocouples and 4–20 mA current loops, without connecting physical hardware. Each module family offers several variants with differing channel counts and output ranges to match specific application requirements.
What Is a PXI Analog Output Module?
A PXI analog output module is a modular instrument that converts digital commands from your test controller into accurate analog voltages or currents. The PXI versions plug into any PXI chassis, a Hybrid slot in a PXIe chassis, or Pickering’s LXI/USB modular chassis, while the PXIe versions plug into any PXIe chassis and share the chassis power, cooling, and control resources with your other modules.
At a basic level, the module houses one or more digital-to-analog converters. Your test software sets a target value, and each channel drives that voltage or current onto its output terminals. Because the outputs are often galvanically isolated, each channel can operate at its own reference potential without interference from adjacent channels.
Engineers use these modules whenever a test needs to feed a controlled analog stimulus into a unit under test (UUT). Common uses include simulating a temperature sensor to check how an engine control unit responds, replacing an industrial 4–20 mA transmitter during system validation, or providing repeatable signals for hardware-in-the-loop (HIL) testing. The result is faster, more repeatable testing without the cost and variability of real sensors.
PXI Analog Output Product Families
The PXI analog output range covers two main product families. Both integrate with existing PXI and PXIe systems and are supported by Pickering's software drivers.
Analog Output/Thermocouple Simulator (41–761 & 41-761A)
- Purpose: Provides multiple isolated, low-voltage sources that accurately simulate thermocouple outputs.
- Application: Ideal for validating temperature measurement and control systems in automotive, aerospace, and industrial test setups, where each channel must sit at an independent potential.
- Technical Range: Available in 8, 16, 24 and 32-channel versions. The 41-761A family offers variant-specific full-scale ranges of ±100 mV, ±250 mV, ±500 mV, ±1000 mV, ±1500 mV, and ±2000 mV to match your thermocouple type and required resolution.
Analog Output/Current Loop Simulator (41/43-765)
- Purpose: Sources precise currents to emulate industrial 4–20 mA current loop transmitters.
- Application: Suited to testing process control, industrial automation, and instrumentation systems that expect current-loop inputs.
- Technical Range: Available in 4, 8, 12, and 16-channel versions on both PXI and PXIe platforms, so you can scale channel density to your application.
How to Choose the Right Module
Use the table below to distinguish the two families and select the variant that fits your test requirement.
| Requirement | Recommended Family | Key Selection Factors |
|---|---|---|
| Simulate temperature sensors (thermocouples) | Thermocouple Simulator (41-761 / 41-761A) | Channel count (8, 16, 24 & 32) and voltage range (±100 mV to ±2000 mV) |
| Simulate 4–20 mA transmitters | Current Loop Simulator (41/43-765) | Channel count (4, 8, 12, 16) and PXI or PXIe platform |
| Need PXIe platform compatibility | Current Loop Simulator (43-765) | Confirm slot type in your chassis |
| Need fine-grained voltage resolution | 41-761A Thermocouple Simulator | Select the narrowest range that covers your signal |
NOTE: Choose the narrowest output range that still covers your maximum signal level, as this gives you the best effective resolution for that measurement.
Compatibility and Software Support
All Pickering PXI analog output modules plug into any PXI chassis, or the Hybrid slot of a PXIe chassis. They can also be hosted in Pickering's LXI/USB modular chassis, allowing remote control over Gigabit Ethernet or USB, which is useful for distributed or space-constrained test systems. The PXIe variants plug into any PXIe chassis.
Each module is supported by Pickering's range of Windows and Linux driver packages, available for free download, along with VISA and IVI driver support for straightforward integration into existing test frameworks. Simulation software supplied with the driver package lets you develop and verify test code before the hardware arrives, reducing overall project time.
Take a look at related content:
5 Ways High-Density PXI Waveform Generators Improve HIL ValidationIntroducing Our Updated Range of PXI/PXIe Analog Output Product Families