USB Hub
A PXIe USB Hub is a modular instrument that streams data to and from USB 2.0 devices via the PXIe backplane, using the system controller's PCIe connection. It lets a test system control USB peripherals directly from within the chassis and programmatically connect or disconnect each port to simulate the physical act of unplugging or plugging in a USB device.
This module can be used when a test system needs to exercise a device under test (DUT) over USB without manual cable handling. Because each port can independently connect and disconnect its power and data paths, the module reproduces real-world connection scenarios, including partial and faulty connections, under full software control.
For a deeper look at how USB integrates into a modular test environment, read our article, "Bringing USB to the PXI Test Environment".
How a PXI USB Hub Works
The USB Hub module provides a set of eight USB 2.0 output ports to the DUT and connects them to the controller via the PXIe backplane. Control is entirely in software, so there are no front-panel controls to operate.
Two capabilities define the module:
- Programmable connect and disconnect: Each output port can be switched on or off in software, simulating the mechanical connection or removal of a USB device without touching a cable.
- Independent power and data control: Every port can connect and disconnect its power and data paths separately, allowing you to reproduce a range of connection faults for robust DUT testing.
When specifying the module, check that:
- Your chassis has a spare PXIe or Hybrid slot to accept the module.
- The number of USB 2.0 ports matches the number of connections your DUT requires.
- Your test sequence needs fault simulation, where independent power and data switching adds value.
Compatibility and Connectivity
Our USB Hub (42-738A-001) installs in a PXIe slot and streams USB 2.0 data over the PXIe backplane, so no external USB cabling to the controller is required. The module is supported by a comprehensive range of cable and connector accessories to link the output ports to your DUT.
For application notes, driver information, and integration guidance, visit our Support Knowledgebase.
Take the Next Step
Ready to add USB control to your PXI test system? Explore the specifications for the 42-738A-001, or contact our engineers to discuss how a USB Hub fits your test requirements.