Empowering Autonomous Air Vehicle Testing: A Collaborative Solution by DMC & Pickering Interfaces
Working with Pickering to develop a complex client solution like this is always a pleasure. We truly appreciate their willingness
to listen to our technical and project needs and consistently provide us with expert knowledge, innovative solutions,
and the responsiveness we require.”
- Brent Hoerman, Senior Manager, DMC
Robust testing is essential to ensure safety and reliability in the complex world of autonomous air vehicles (AAVs). To meet this requirement, we combined our experience developing precision modular test instrumentation with the expertise of our partner DMC, a test solutions and engineering consulting firm with a strong background in the EV/Battery application space. The result was we were able to deliver a robust Hardware-in-the-Loop (HIL) test stand for a leading global consumer goods delivery company.
The Challenges
Rigorous testing protocols were required to emulate the function of their AAV’s battery pack and fully test and validate both the Battery Management System (BMS) and flight electronics across a range of operating conditions. Conventional testing methods fell short of these requirements due to safety issues inherent in testing real-life scenarios such as under/over temperature/charge and fault conditions that could occur either during the battery pack assembly or vehicle operation.
Collaborative Approach
To overcome the complexity of these challenges, we combined our expertise in modular signal switching and simulation solutions with DMC's mastery of motion control and automation to deliver a state-of-the-art HIL test stand that integrates advanced hardware and software components. The result allows our client to emulate the dynamic operational environment of the AAV with a tailored HIL simulation solution that meets the project's stringent demands.
The Solution
The HIL system we collaborated on is a complex but modular assortment of commercial-off-the-shelf (COTS) and DMC custom hardware. DMC was looking to utilize an open, modular platform that could be tailored to their client’s requirements and integrate well with the NI VeriStand software they use at the heart of their solution. We provided DMC with an LXI chassis loaded with our PXI Battery Cell Simulator and Variable Resistor cards. DMC combined these with their Battery Fault Injection Modules to allow the client to place any combination of cells in one of four states: no-fault condition, cell reversed, cell short-circuited, or cell open circuit. For the control system, DMC chose VeriStand and designed a NI LabVIEW-based Battery Cell Model for the platform. This VeriStand control model runs on an embedded real-time controller (NI cRIO) with c-series Analog and Digital Output Modules to easily handle the required high-speed I/O and simulation loops. The client also incorporated Keysight’s RP7900 Series Power Supplies to power the drone’s electronics and motors. Ultimately, when the client runs a simulated flight with their drone, the system simulates the battery pack operation throughout that flight, allowing the client to test the BMS and power electronic system’s response simultaneously.
The Benefits
- Modular Architecture: The test stand boasts a flexible and scalable design, easily accommodating diverse testing requirements and allowing for future expansions and integration of additional functionalities as needed, all contained in a small rack enclosure that allows ergonomic use and easy access to components.
- Realistic Simulation: We can replicate real-world conditions by generating precise and repeatable signals that facilitate comprehensive testing of the AAV's response to various stimuli.
- Precision Control: DMC's Battery Cell Model is completely adjustable for simulating various cell chemistries. The fast model response allows emulation of real-world fault conditions. In addition, the use of NI VeriStand ensures flexible sequencing and control.
- Enhanced Testing Efficiency: The comprehensive test stand accelerates the testing process, facilitating faster iteration and refinement of the AAV's design.
- Improved Accuracy: The model adjusts the simulated temperature of the cells based on measured battery usage so it reacts exactly as expected when the battery is charged and discharged, minimizing the risk of unforeseen issues during deployment.
- Cost Savings: The solution optimizes resource allocation and mitigates project costs by streamlining the testing process and reducing reliance on physical prototypes.
- Time Savings: In-house assembly, improvements, and modifications ensure quicker turnaround.
Conclusion
As test and measurement industry pioneers, Pickering Interfaces and DMC remain committed to driving innovation and delivering cutting-edge solutions that align with the evolving needs of the aerospace sector. The direct collaboration between our engineers demonstrates the power of partnership in modular signal switching, simulation, software, hardware, and motion control. The combination of our open-platform products with DMC’s expertise in developing BMS test solutions resulted in a tailored HIL test stand that empowers our client to confidently test and validate the safe operation of their autonomous air delivery vehicles.
Learn more about Battery Management System Testing here.