Meeting Complex Avionics Test Demands with PXIe Hybrid System Integration: How Pickering Solved a Unique Challenge


What started as a demonstration of a solution to a signal multiplexing problem soon evolved into providing a variety of PXIe-based test and simulation modules and custom cabling to support the construction of five highly capable ATE stations.

In terms of business jets, until recently, the aerospace company we are referencing in this case study had commercial jets that could seat up to about 50 passengers. However, the company has now developed an aircraft accommodating more than 100 passengers.

To support the development and production of the new aircraft, they planned to use automated test systems (ATS) to verify the connectivity of the avionics systems. Four systems will be used during production, and a fifth will be kept in reserve as a spare or for developing new tests.

In early February 2023, they shortlisted six systems integrators and asked them to quote for the provision of ATS hardware and software. One of the integrators quickly contacted Pickering to discuss the provision of suitable hardware. 

A particular challenge was switching a MIL-STD-1553 differential serial data bus with a strict line impedance of 78Ω; the OEM had struggled to support this requirement in the past, not finding any suitable off-the-shelf solutions. 

Fortunately, Pickering had already received the same request from several other customers in the past and had developed a family of PXI and PXIe controlled-impedance differential multiplexers specifically designed to handle this avionics data bus. Pickering created a demo system consisting of an LXI modular chassis containing a dedicated PXI 1553 multiplexer module, together with custom-built twisted-pair cables, and passed this to the system integrator to exhibit to the OEM. The system worked perfectly, and Pickering won great respect from the aerospace company. 

As a result, the company invited Pickering to present an overview of its products, detailing the capabilities of modules used extensively in aerospace test and simulation applications. The company also stressed the importance of choosing the right chassis on which to base the ATS. Specifically, while the demonstration had employed an LXI modular chassis, it was felt a PXIe-based solution would be better in the long run in terms of future integration and modifications and, therefore, a better total cost of ownership for the customer.

It was a very good meeting as, until this point, the end customer and Pickering had no direct relationship. They had ordered some parts from us a few years before. However, for major projects, everything had gone through systems integrators. - Comments, Michael Crespin, Sales Director

The Solutions

The following Pickering products were identified and agreed upon to meet the customer's test requirements – all PXIe modules are also available in PXI format:


PXI and LXI Chassis
  • PXIe 18-slot full hybrid chassis (42-926-001). Based on high-speed PCIe Gen2 technology, this chassis is a cost-effective option if you want a flexible, fully hybrid solution but don’t need the ultimate data transfer rate of our Gen3 chassis.
  • Remote control interface kit (43-921-001-KIT). The kit comprises a PXIe module (43-921-001, on the left) with a daisy-chain facility, a PCIe remote control interface card (53-921-001), and a 2-meter interface cable (not shown)
  •  PXIe multiplexers (40-739-001) are designed specifically for physical layer multiplexing or demultiplexing of differential signals that conform to the MIL-STD-1553 avionics serial data bus specification. These modules can be supplied as single or dual 2-pole multiplexers with 4, 8 or 16 channels, with each signal pair having a controlled 78 Ohm differential impedance.
  • PXIe 16-channel analog output module (43-765-001) designed to meet the requirements of industrial control applications utilizing 4-20mA current loops. It consists of up to four 16-bit, digital-to-analog converters (DACs), capable of creating four current outputs each. Output current in the ranges 0 to 4mA and 20 to 24mA provide for simulating error or extra signaling conditions. The ±24mA mode gives the ability to simulate either sourcing or sinking sensor.
  • PXIe 80xSPST relay module (42-139A-101, shown above) and a PXIe 52xSPDT relay module (42-139A-201). Both are suitable for high-density switching applications with medium power, and the relays have a 2A current capacity with voltage rating to 300 VDC/250 VAC.
  • PXIe high-density power relay module (42-153-001-HI) with 50 SPST switches. Electro-mechanical power relays are used, which are suitable for switching loads up to 5A at 250VAC.
  •  PXI 10 A power relay module (40-160-001) is suitable for switching heavy AC or DC loads or slaving to large external relays, contactors and solenoids.
  •  PXIe 128-channel digital input module (42-414-101) with input voltages up to 50 V provides a convenient way of determining the status of input lines by comparing the input voltage with two programmable threshold voltages - quickly establishing if the input is low, high or in an intermediate logic state.
  • LXI high-density 192x8 single-pole matrix module (60-550-023) capable of switching up to 300VDC/250VAC or 2A (60W max). High-quality electro-mechanical relays offer high switching confidence and make them suitable for signal routing in large ATE systems.
Specifically, each ATE system is based on two 18-slot PXIe hybrid chassis daisy-chained together; thus, each system can accommodate multiple relay modules. Pickering also supplied more than 70 custom cables. One of our core capabilities is custom cabling, something we are becoming more well known for, continues Crespin. Our Connect division has created and delivered fit-for-purpose cables of various impedances for many customers. 

The cables were designed and built in Pickering’s factory in the Czech Republic—where its Connect division is based—and Pickering’s graphical Cable Design Tool was supplied to speed the design-to-production process. Once we knew exactly what was required, it took us just a few working days to get a quote out for 14 different cables, recalls Crespin. We had much shorter lead times than the customer’s incumbent supplier.

Updated Strategy 

After the hardware was agreed upon, quoted, and prices accepted, a change of plan was made. For expediency, the aerospace company used in-house engineering resources to build the test systems. In other words, Pickering would supply the hardware and cables directly to the end customer.

Also, while the order was for five systems, it was decided to supply just one in the first instance and get it fully integrated. This gave the aerospace company’s engineers time to devise a test sequence and generate the software application code. Note: during this time, Pickering’s cabling specialists in the Czech Republic were on standby, ready to assist and, if necessary, visit the customer in case modifications needed to be made. 

A PXIe chassis has to be powered before the controlling PC boots so that the PC can correctly detect the chassis and associated modules via the PCIe bus. When the chassis is contained within a cabinet, opening it to access power switches is not ideal, nor is keeping it powered 24/7. 

Pickering’s solution to this problem is to keep the chassis in sleep mode, a specific chassis feature that customers value. 

Another reason for selecting Pickering is that the ATE system’s operating system is Linux, whereas most test systems are Windows-based. There are many PXI vendors in the industry, but only a few—Pickering is one—offer Linux drivers. 

This was an amazing project, concludes Crespin, in terms of how it all came together, how technical problems were solved, such as multiplexing impedance-critical signals and the use of the sleep mode for the PXIe chassis, the rapid creation of custom cables and the staggered delivery of products to give the customer earliest possible access to hardware.

Summary 

This case study details how Pickering successfully addressed a complex avionics testing challenge for an aerospace company developing a new aircraft. The company needed automated test systems (ATS) to verify avionics connectivity. Pickering's solution involved providing PXIe-based test and simulation modules, custom cabling, and an 18-slot PXIe hybrid chassis, overcoming a significant hurdle of switching a MIL-STD-1553 differential serial data bus with a strict line impedance of 78 ohms. The project also highlights Pickering's flexibility in adapting to a change of plan, supplying hardware directly to the customer and providing support throughout the integration process. The successful collaboration resulted in a highly efficient and cost-effective testing solution.

Beta

How can I help?

Hi , I'm TESS - your friendly AI agent

Press Enter to submit

TESS is a moderated, AI agent. TESS can make mistakes, please verify important information independently.


Chat history

Log in or create an account to save & continue your chats with TESS.

Log in

or create an account