PXI Amplifier and Attenuator Modules
PXI amplifier and attenuator modules condition analog signals within a PXI system, either boosting signal amplitude (amplifiers) or reducing it (attenuators) so that other instruments can generate or capture those signals accurately. Test engineers use these modules to match signal levels between a source and a device under test (DUT), protect sensitive instruments from excessive voltage, and simulate real-world sensor outputs during hardware verification.
Pickering's range includes a programmable attenuator covering DC to 3 GHz with 1 dB step resolution, allowing precise adjustment of signal amplitudes for optimum measurement by other devices. A second programmable attenuator operates between 10 MHz and 6 GHz and is available in triple-format or hex-format for higher channel counts.
For high-voltage applications, our high-voltage attenuator reduces high-voltage, low-frequency signals to levels that other PXI devices can safely capture without risk of damage. Our high-voltage amplifier increases the signal amplitude from waveform or function generators, enabling them to simulate real-life sensor outputs.
Attenuators
Programmable attenuator modules reduce signal amplitude to levels suitable for measurement by other PXI instruments. The range includes a low-frequency attenuator with 10 single-ended or 5 differential channels, programmable attenuation from 10:1 to 160:1, and the ability to reduce signals up to 600 V to below 4 V.
Two RF attenuator families are also available: a DC-to-3 GHz module with one or two channels, providing up to 63 dB attenuation in 1 dB steps; and a 10 MHz-to-6 GHz module with 3 or 6 channels, offering 0 to 31.75 dB attenuation in 0.25 dB steps. The 6 GHz family uses solid-state switching for fast operation, long service life, minimal settling time, and no signal bounce.
Applications: Signal conditioning, high voltage signal capture, RF and microwave measurement
Amplifiers
Programmable amplifier modules provide five independently controlled channels, boosting waveform or function generator signals to ±33 Vpk with gain up to 20. They offer a DC-to-120 kHz large-signal bandwidth and a 1.5 MHz small-signal bandwidth, with D-type or SMB connector options.
The high-voltage amplifier allows low-level sources to drive higher-voltage outputs, making it ideal for simulating real-world resistive and reactive sensors in hardware-in-the-loop (HIL) testing.
Applications: Sensor simulation, signal boosting for function and waveform generators
Which Module Do You Need?
Use the table below to match your requirement to the right product family.
| Requirement | Recommended Family | Key Specification |
|---|---|---|
| Reduce RF signal amplitude for measurement | RF Attenuators | 1 or 2 channels, DC to 3 GHz, up to 65 dB attenuation in 1 dB steps |
| Higher frequency, higher attenuation resolution or higher channel count, with PXIe options | RF Attenuators | 3 or 6 channels, 10 MHz to 6 GHz, up to 31.75 dB attenuation in 0.25 dB steps |
| Attenuate high-voltage, low-frequency signals safely | High-Voltage Attenuator | 10 single-ended or 5 differential channels, input up to 600 V with programmable attenuation factors up to 160 |
| Boost a generator's output to simulate a sensor | Amplifiers | Five programmable gain (up to ×20) channels, output up to ±33 Vpk, large-signal bandwidth DC to 120 kHz, small-signal bandwidth 1.5 MHz |
Compatibility and Integration
Every PXI module in this range plugs into any compliant PXI slot or Hybrid slot in a PXIe chassis, and the PXIe modules are compatible with any PXIe chassis, so you can add signal conditioning to an existing system without reworking your chassis or controller. Pickering's PXI modules can also be hosted in our LXI/USB modular chassis for remote control over Ethernet or USB.
To speed up system integration, we supply matching in-house manufactured, standard and custom cables and connectors for these modules, along with Windows and Linux drivers available for free download, offering seamless installation and support of all popular Programming languages such as C/C++, LabVIEW™, LabVIEW RT, .NET, VB, LabWindows/CVI, MATLAB®, Python, ATEasy, TestStand™ and VeriStand™.
Pickering manufactures standard and custom mating cables and connectors for these modules, and our Test System Architect toolset helps you design and visualize complete signal paths. Explore each product family above or use our Product Selector to match a module to your exact test requirements. For help specifying a solution, contact your local Pickering engineer.