PXI Matrix Switch Modules

PXI matrix switch modules contain a grid of switches that route signals between any row and any column, letting you connect multiple instruments to your device under test through a single, flexible switching structure. They handle low-, medium-, and high-density channel switching in one instance, making them the standard choice when a test system needs to share instruments across many test points.

What Is a PXI Matrix Switch Module?

A PXI matrix switch module is a switching card that arranges relays in a grid of rows (Y-axis) and columns (X-axis), allowing any row to programmatically connect to any column by operating the specific crosspoint relay. This architecture gives you the most routing flexibility of any switch topology, since a single signal can reach multiple destinations, and multiple signals can be routed simultaneously.

In a typical test system, matrices connect multiple stimulus and measurement instruments, as well as other test resources, to the pins of your device under test (DUT). When your application requires that any instrument can connect to any DUT pin and to other instruments, a matrix is the right tool.

Choosing the Right Matrix Density

Use the guide below to match a matrix family to your application. Density, voltage, and current ratings are the primary selection criteria.

Matrix Family Crosspoints Voltage Rating Current Rating Best Suited For
Low Density 48 to 96 Up to 300 V 2 A Compact systems with a limited number of test points
Medium Density 128 to 192 Up to 300 V 2 A Mid-size systems balancing channel count and slot usage
High Density 256 to 528 Up to 300 V 2 A Large channel-count systems where slot space is at a premium
High Power 12 to 80 — Up to 30 A Routing high-current loads such as power devices and actuators
High Voltage 12x2 or 6x4 Up to 1000 V 5 A Testing high-voltage components such as EV and power electronics, and product isolation.


If you need the highest crosspoint density available, consider our large PXI matrix modules (BRIC), including a 2 Amp version with the highest crosspoint density in the industry.

Software and Connectivity

Every matrix module is supported by driver packages for all major Windows and Linux platforms, in both 32- and 64-bit versions. These drivers support all popular programming languages, including LabVIEW, C++, .NET, and Python, so the modules will seamlessly integrate with your existing test environment.

To manage the routing complexity of large matrices, use our signal routing software, Switch Path Manager, which automatically calculates and controls signal paths across your switching system. For system integration, we offer a large range of mating cables and connectors to help you connect quickly and reliably.

All Pickering PXI modules plug into any compliant PXI chassis or a Hybrid slot in a PXIe chassis and can also be hosted in our LXI and USB modular chassis for remote control over Gigabit Ethernet or USB. Our PXIe modules are compatible with any PXIe chassis.

FAQs

What is the difference between a matrix and a multiplexer?

A matrix is a grid of switches that can connect any row to any column, enabling multiple simultaneous signal paths and allowing several instruments to reach the same DUT pin. A multiplexer connects one of many inputs to a single common output, which is more restrictive but uses fewer relays. Choose a matrix when your application requires full routing flexibility, and a multiplexer when you need to select only one signal at a time.

How many crosspoints do I need?

The crosspoint count is the product of the rows and columns your application requires, which depends on the number of instruments and the number of DUT connection points they must reach. Map out every instrument-to-pin path first, then select a density that covers those paths with room for expansion.

Can I control a matrix module remotely without a PXI chassis?

Yes. Pickering PXI matrix modules can be hosted in our LXI/USB modular chassis , allowing remote control over Ethernet or USB3 without a PXI chassis or embedded controller. This is useful when your test system is distributed or when you want to isolate the switching from the host controller.

Which platforms do the drivers support?

Pickering supplies driver packages for all major Windows and Linux platforms in both 32- and 64-bit versions, with support for all popular programming languages. This lets the modules integrate with existing test software and legacy systems with minimal reconfiguration.

Next Steps

Ready to specify the right matrix for your test system? Use our Product Selector to filter modules by density, voltage, and current, or explore the Test System Architect toolset to design and visualize complete signal paths. If you'd like help matching a module to your specifications, contact our application engineers.

PXI Matrix Switch Modules | Pickering Interfaces
Loading

Test System Architect

Design and Visualize Complete Test System Signal Paths

Bring system configuration, schematic design, cable design and product selection into a single, cohesive workflow for test system development using our Test System Architect online toolset.

Learn more

Beta

How can I help?

Hi , I'm TESS - your friendly AI agent

Press Enter to submit

TESS is a moderated, AI agent. TESS can make mistakes, please verify important information independently.


Chat history

Log in or create an account to save & continue your chats with TESS.

Log in

or create an account