PXI/PXIe Battery Simulator Modules

Our battery simulator modules emulate the electrical behavior of battery cells, stacks, and power supplies for test and verification. They source current to mimic a battery supply or sink current to mimic a battery under charge, letting you test a device without physical cells. Engineers use them to validate battery management systems (BMS), electric vehicle (EV) systems, portable electronics, and energy storage without the cost, safety risk, or logistical burden of real battery packs.

Most modules fit a standard PXI or PXIe form factor and integrate directly into your existing chassis. High-density channel counts, scalable architectures, and high-isolation voltage barriers enable you to emulate many series-connected cells in a single chassis, making these modules a cost-effective foundation for battery test systems.

What Is a PXI Battery Simulator Module?

A PXI battery simulator module is a programmable power source and sink that reproduces the output characteristics of a battery cell. Rather than charging and discharging physical cells, the module presents a controllable voltage and current at each channel, so your test system sees a realistic battery under a range of conditions.

At a basic level, each channel behaves as an isolated cell. You program the output voltage, and the module either sources current to simulate a battery under load or sinks current to simulate a battery being charged. Multi-channel modules stack these isolated cells in series behind a high-voltage isolation barrier, enabling a single module to emulate a battery stack rather than a single cell.

Engineers reach for these modules during BMS development, functional test, and hardware-in-the-loop applications, where triggering fault conditions or specific cell voltages on real batteries would be slow, expensive, or unsafe.

When Should You Use a Battery Simulator Module?

Use a battery simulator module whenever you need repeatable, controllable battery conditions without the hazards of live cells. Common applications include:

  • BMS verification: Set individual cell voltages to test balancing, monitoring, and fault-detection logic.
  • Electric vehicle testing: Emulate high-voltage battery stacks using series-connected channels behind a high isolation barrier.
  • Portable device testing: Simulate the power supply of cell phones and other battery-powered equipment.
  • Energy storage systems: Recreate charge and discharge conditions to validate control electronics.

Battery Simulator Module Families

The PXI battery simulator range covers three product families, each suited to a different application and technical range.

41/43-752A Series: Multi-Channel Battery Stack Emulation

Purpose: Emulate series-connected battery stacks, such as those found in electric vehicles.
Application: BMS test, EV powertrain validation, and high-voltage battery systems.
Technical range: 2, 4, or 6 channels in a single PXI or PXIe slot, with 750 V or 1 kV isolation barriers. Variants offer voltage and current (V/I) readback and simplified current sink options. Available in both PXI and PXIe.

The high channel density and high isolation-voltage barrier allow you to place many cells in series within a single PXI or LXI chassis, making this the primary choice for battery stack emulation.

41–754 Series: Higher-Current Battery Stack Emulation

Purpose: Emulate battery stacks that require higher per-channel current.
Application: Electric vehicle battery stack testing where greater current sourcing and sinking are needed.
Technical range: 4 channels rated to 5 A, available in both PXI and PXIe, suited to applications that demand more power per channel than the 752A range.

41–750, 41–751, and 41–753 Series: Single-Cell Simulation

Purpose: Simulate the power supply of a single battery-powered device.
Application: Cell phone testing and other portable, battery-powered equipment.
Technical range: Single channel, up to 6 V DC, with current ratings from 0.25 A (41–751) to 0.5 A (41–750) and 2.8 A (41–753). The 41–753 also offers programmable output resistance from 0 to 1.15 Ω.

How to Choose the Right Module

Use the checklist below to narrow the range to the models that fit your application.

  • Number of cells: Choose a single-channel module (41–750, 41–751, or 41–753) for one battery-powered device, or a multi-channel 752A or 754 module to emulate a series-connected stack.
  • Isolation voltage: Select 750 V or 1 kV isolation for the 752A range, depending on the total stack voltage you need to emulate.
  • Current requirement: For higher per-channel current, choose the 5 A 41–754 range over the 752A modules.
  • Measurement needs: Choose a V/I readback variant if you need to measure the voltage and current at each channel during test.
  • Sink requirement: Select a simplified current sink variant where a reduced sink capability meets your charge-simulation needs at lower cost.
Battery Simulator Family Channels Max Voltage Key Application
41/43-752A 2, 4, 6 Up to 1 kV Battery stack emulation (EV, BMS)
41/43-754 4 High-current (5 A) Higher-current stack emulation
41-753 1 6 V DC Cell phone and portable device power
41-751 / 41-750 1 6 V DC Low-power portable device power

Software, Connectivity, and Compatibility

All Pickering PXI modules plug into any PXI chassis or a Hybrid slot in a PXIe chassis. They can also be hosted in Pickering's LXI/USB modular chassis, allowing remote control over a Gigabit Ethernet or USB connection. This flexibility lets you deploy the same module across bench, rack, and distributed test systems without changing your core hardware.

The modules ship with a range of Windows and Linux drivers for straightforward integration into your existing test software. Matching cables and connectors are available to speed up system integration and ensure reliable connections to your device under test.

Frequently Asked Questions

Can a battery simulator module both charge and discharge a device?

Yes. Each channel can source current to simulate a battery supplying power and sink current to simulate a battery being charged. This lets a single module cover both discharge and charge test conditions.

How do I emulate a high-voltage EV battery stack?

Use a multi-channel 752A module and connect the isolated channels in series. The high isolation-voltage barrier, up to 1 kV, allows many cells to be connected in series within a single PXI or LXI chassis, reproducing the stack voltage a BMS expects to see.

What is the difference between the standard and V/I readback variants?

Standard modules set the output voltage at each channel. At the same time, V/I readback variants additionally measure the voltage and current at each channel, which is useful when you need to confirm the actual output the device under test is drawing during a test sequence.

PXI & PXIe Battery Simulator Modules | Pickering Interfaces
Untitled Button

41-752A-113

PXI/PXIe Battery Simulator Module, 2-Channel, V/I Readback, 1 kV Isolation

Two Battery Cell Simulators with a 1 kV isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
1000
Channels
2
€5,125

41-752A-112

PXI/PXIe Battery Simulator Module, 4-Channel, V/I Readback, 1 kV Isolation

Four Battery Cell Simulators with a 1 kV isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
1000
Channels
4
€6,230

41-752A-111

PXI/PXIe Battery Simulator Module, 6-Channel, V/I Readback, 1 kV Isolation

Six Battery Cell Simulators with a 1 kV isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
1000
Channels
6
€7,315

Design and Visualise Test System Signal Paths

Bring system configuration, schematic design, cable design and product selection into a single, cohesive workflow for test system development.

Start designing

Design and Visualise Test System Signal Paths

Design test system switching and signal routing.

41-752A-103

PXI/PXIe Battery Simulator Module, 2-Channel, 1 kV Isolation

Two Battery Cell Simulators with a 1 kV isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
1000
Channels
2
€4,105

41-752A-102

PXI/PXIe Battery Simulator Module, 4-Channel, 1 kV Isolation

Four Battery Cell Simulators with a 1 kV isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
1000
Channels
4
€4,965

41-752A-101

PXI/PXIe Battery Simulator Module, 6-Channel, 1 kV Isolation

Six Battery Cell Simulators with a 1 kV isolation barrier in a Single PXI or PXIe Slot, Suitable for Battery Stack Emulation.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
1000
Channels
6
€5,855

41-752A-913

PXI/PXIe Battery Simulator Module, 2-Channel, V/I Readback, Simplified Current Sink, 750 V Isolation

Two Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation - Version with Simplified Current Sink.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
750
Channels
2

41-752A-912

PXI/PXIe Battery Simulator Module, 4-Channel, V/I Readback, Simplified Current Sink, 750 V Isolation

Four Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation - Version with Simplified Current Sink.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
750
Channels
4
€5,660

41-752A-901

PXI/PXIe Battery Simulator Module, 6-Channel, Simplified Current Sink, 750 V Isolation

Six Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable for Battery Stack Emulation - Version with Simplified Current Sink.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
750
Channels
6

41-752A-902

PXI/PXIe Battery Simulator Module, 4-Channel, Simplified Current Sink, 750 V Isolation

Four Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation - Version with Simplified Current Sink.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
750
Channels
4

41-752A-903

PXI/PXIe Battery Simulator Module, 2-Channel, Simplified Current Sink, 750 V Isolation

Two Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation - Version with Simplified Current Sink.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
750
Channels
2

41-752A-911

PXI/PXIe Battery Simulator Module, 6-Channel, V/I Readback, Simplified Current Sink, 750 V Isolation

Six Battery Cell Simulators with a 750 V isolation barrier n a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation - Version with Simplified Current Sink.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
750
Channels
6
€6,640

41-752A-013

PXI/PXIe Battery Simulator Module, 2-Channel, V/I Readback, 750 V Isolation

Two Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
750
Channels
2
€4,655

41-752A-012

PXI/PXIe Battery Simulator Module, 4-Channel, V/I Readback, 750 V Isolation

Four Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
750
Channels
4
€5,660

41-752A-001

PXI/PXIe Battery Simulator Module, 6-Channel, 750 V Isolation

Six Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable for Battery Stack Emulation.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
750
Channels
6
€5,320

41-752A-011

PXI/PXIe Battery Simulator Module, 6-Channel, V/I Readback, 750 V Isolation

Six Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
750
Channels
6
€6,640

41-752A-003

PXI/PXIe Battery Simulator Module, 2-Channel, 750 V Isolation

Two Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
750
Channels
2
€3,735

41-752A-002

PXI/PXIe Battery Simulator Module, 4-Channel, 750 V Isolation

Four Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.

Product Type
Battery Simulator
Platform
PXI/PXIe
Max I (A)
0.3
Max V DC
750
Channels
4
€4,520

41-753-001

PXI Battery Simulator 2.8 Amps

The 41-753 is a battery simulator module that can be used to simulate the power supplies of cellular phones and other portable battery devices

Product Type
Battery Simulator
Platform
PXI
Max I (A)
2.8
Max V DC
50
Channels
1
Max R (Ω)
1.15
Min R (Ω)
0
€3,945

41-752-001

PXI 6-Channel Battery Simulator Module

Alternative product available, please refer to the 41-752A range.

Product Type
Battery Simulator
Platform
PXI
Max I (A)
0.3
Max V DC
750
Channels
6

41-751-001

PXI Battery Simulator Module

The 41-751 is a low power battery simulator module that can be used to simulate the power supplies of cellular phones and other portable battery devices

Product Type
Battery Simulator
Platform
PXI
Max I (A)
0.25
Max V DC
50
Channels
1
€3,530

41-750-001

PXI Battery Simulator Module

The 41-750 is a battery simulator module that can be used to simulate the power supplies of cellular phones and other portable battery devices.

Product Type
Battery Simulator
Platform
PXI
Max I (A)
0.5
Max V DC
50
Channels
1
Loading
Beta

How can I help?

Hi , I'm TESS - your friendly AI agent

Press Enter to submit

TESS is a moderated, AI agent. TESS can make mistakes, please verify important information independently.


Chat history

Log in or create an account to save & continue your chats with TESS.

Log in

or create an account