PXI Programmable Resistor Modules

PXI programmable resistor modules are simulation instruments that replicate the behavior of resistive sensors and variable resistors within a test system. They let a test engineer set precise resistance values under software control and verify how a device under test (such as an engine controller) responds to changing sensor inputs without connecting the physical sensor.

Part of our Sensor Simulation family, these modules are well-suited to medical, aerospace, and automotive applications, including hardware-in-the-loop (HIL) testing. Because each module installs directly into a PXI chassis, it integrates into your existing test system with minimal disruption.

How Do PXI Programmable Resistors Work?

A programmable resistor uses a network of switched resistive elements to produce a specific resistance value on demand. Your test program sends a command over the PXI backplane, the module sets the requested resistance, and the device under test reads that value as though it came from a real sensor.

This approach provides repeatable, automated control over sensor conditions, reducing test cycle time and improving defect detection compared with manual methods.

Key Features

  • High channel density: Up to 18 channels in a single PXI slot, saving valuable chassis space.
  • Wide resistance range: Values from 1Ω to 22MΩ cover a broad set of sensor types.
  • High resolution and accuracy: Resolutions down to 2mΩ, with accuracies down to 0.03%.
  • Chassis flexibility: Every module can also be supported in our Ethernet LXI chassis, so you can deploy the same modules in PXI or LXI systems. We also offer programmable resistors in PCI format.

When to Use a Programmable Resistor

Use a programmable resistor module whenever your test system needs to simulate a resistive sensor rather than depend on the physical component. Common scenarios include:

  • Validating engine and powertrain controllers in automotive testing.
  • Simulating temperature, strain, pressure, load, moisture, or light sensors in HIL rigs.
  • Replacing hard-to-source or hazardous physical sensors during development.

Which Programmable Resistor Module Is Right for You?

The table below compares our module families so you can match the right option to your resolution, accuracy, and power requirements.

Module Family Best Suited For Key Technical Range
Standard Resistors General-purpose sensor simulation Resolutions down to 0.25Ω, accuracies down to ±0.3%
Precision Resistors Applications demanding the highest accuracy Resolutions down to 0.002Ω (2mΩ), accuracies down to 0.03%
Selectable Resistors Cases needing a fixed set of specific values rather than full programmability Discrete, pre-defined resistance values
Load Resistors Applications requiring programmable resistance with power handling Power handling up to 15W
RTD Simulators Simulation of resistance-based temperature sensors PT100 and PT1000 sensor types

Software and Compatibility

All of our programmable resistor modules ship with comprehensive Windows and Linux driver support and work with APIs for major programming languages, such as Python, C#, and NI LabVIEW™. You can also host them in any compliant PXI chassis or a Hybrid slot in a PXIe chassis and can also be hosted in Pickering's LXI/USB modular chassis for remote control over Ethernet or USB, giving you flexibility across bench and rack-based deployments. Our simulation software, included with the PXI driver installation, lets you develop and verify test system software independently of the physical hardware. This means your test program development can begin before modules arrive, reducing overall project lead time.

Learn More About Programmable Resistors

Video: Intro to Programmable Resistors

Article: What is a Programmable Resistor

Webinar: Using Programmable Resistors for Sensor Simulation

White Paper: Understanding Programmable Resistors for Sensor Simulation

Product Reference Map

FAQs

What is the difference between a programmable resistor and a load resistor?

A standard programmable resistor is designed for signal-level sensor simulation, where the resistance value matters but current and power are low. A load resistor adds power-handling capability, up to 15W in our range, for applications where the channel must dissipate meaningful power.

Can I use PXI programmable resistor modules in an LXI or USB system?

Yes. Every Pickering programmable resistor module is supported in our LXI and USB modular chassis, allowing remote control over Gigabit Ethernet or USB. This lets you standardize on one set of modules across PXI, PCI, and LXI deployments.

What sensor types can these modules simulate?

Our programmable resistors can simulate a wide range of resistive sensors, including temperature, strain, pressure, load and force, moisture, and light sensors. RTD simulator modules specifically address PT100 and PT1000 temperature sensors.

How long will these modules be supported?

Pickering designs and manufactures its switching and simulation products in-house, which supports guaranteed long-term availability, typically 15 to 20 years, and low obsolescence. This makes them a dependable choice for test systems expected to remain in service for many years.

PXI Programmable Resistor Modules | Pickering Interfaces
Loading

Test System Architect

Design and Visualize Complete Test System Signal Paths

Bring system configuration, schematic design, cable design and product selection into a single, cohesive workflow for test system development using our Test System Architect online toolset.

Learn more

Beta

How can I help?

Hi , I'm TESS - your friendly AI agent

Press Enter to submit

TESS is a moderated, AI agent. TESS can make mistakes, please verify important information independently.


Chat history

Log in or create an account to save & continue your chats with TESS.

Log in

or create an account