PXI Fault Insertion (Fault Injection) Modules
PXI fault insertion units (FIUs) are specialized switching modules used in hardware-in-the-loop (HIL) simulation and test systems. to programmatically introduce interconnection faults, typically open circuits, pin-to-pin shorts, and shorts to power or ground, into the signal paths between a control system and sensor simulators that reproduce the signals from the real-world sensors that monitor its operational environment.
Engineers use FIUs to verify how a control system responds if its real-world connections fail, making them essential for validating that safety-critical controllers behave reliably and repeatably under a range of fault conditions. The automated FIUs replace manual fault insertion via break-out boxes, significantly accelerating and improving the accuracy & repeatability of testing, diagnosis, and design verification.
What Is a Fault Insertion Unit, and How Does It Work?
A fault insertion unit sits between your device under test (DUT) and the surrounding simulation or real-world hardware. Under software control, it routes each signal path to one of several states: normal connection, open circuit, or a connection to a shared fault bus. The fault bus can then apply conditions like a short to battery voltage, a short to ground, or a pin-to-pin short between channels.
This approach lets you automate fault scenarios that would otherwise require manual rewiring, reducing test cycle time, and improving repeatability. For engineers validating an electronic control unit (ECU), an FIU confirms that safety mechanisms trigger correctly when a sensor line fails.
When Would an Engineer Use a PXI Fault Insertion Module?
You would use a PXI FIU whenever a control system’s operation must be validated against sensor or wiring faults before deployment. Common applications include:
- Automotive ECU Validation: Confirm that safety-critical engine, braking, and battery management systems respond safely to open or shorted sensor connections.
- Aerospace and Defense Systems: Verify fault tolerance in flight control and mission-critical electronics.
- Power Grid Management: By intentionally introducing faults, engineers can observe how the system responds, identify weak points, and ensure it can recover and that safety mechanisms are functioning correctly.
How to Choose the Right Fault Insertion Module
Use the table below to match your application to the appropriate FIU family.
| Requirement | Recommended Option |
|---|---|
| Large channel counts with flexible fault routing | Large channel counts with flexible fault routing |
| Moderate channel counts, simpler fault switching | Fault Insertion Switch |
| Differential or serial communications (e.g., automotive Ethernet) | Fault Insertion Serial Interfaces |
| Combined breakout access and fault insertion | MBoS Modular Breakout System |
| High current handling up to 40A | Check per-module current rating |
| Multi-gigabit Ethernet fault testing | MEMS-based 40/42–205 |
Connectivity, Compatibility, and Support
All Pickering PXI fault insertion modules plug into any compliant PXI chassis or a Hybrid slot in a PXIe chassis and can also be hosted in Pickering's LXI/USB modular chassis for remote control over Ethernet or USB. Our PXIe modules are compatible with any PXIe chassis. Our drivers support all popular operating systems, programming environments, and major HIL software platforms, including;
- Real-time operating systems, such as NI Linux Real-Time, QNX, Windows, RTX, and other major Linux distributions
- Programming languages such as C, C++, Python, .NET, etc.
- NI software such as VeriStand (CustomDevices), TestStand, LabVIEW, etc.
- Mathworks’ SimuLink and MatLab
- Vector CANoe (CAPL)
We also offer in-house manufactured standard and custom mating cables and connectors for these modules to support fast, reliable system integration. Every product is backed by our three-year warranty, along with guaranteed long-term support and low obsolescence.
Frequently Asked Questions
What is the difference between a fault insertion matrix and a fault insertion switch?
Can Pickering fault insertion modules test automotive Ethernet?
What current levels do Pickering FIUs support?
Are Pickering fault insertion modules compatible with PXIe chassis?
For deeper technical detail, visit our Support Knowledgebase , or feel free to contact a Pickering engineer to discuss your requirements.