PXI Analog Output / Current Loop Simulators

PXI current loop simulators are modular instruments that replicate industrial 4–20mA current loop transceivers for functional test. They allow test engineers to mimic sensor and transmitter behavior, insert faults, and verify control systems without connecting live field hardware. Pickering's range delivers 4 to 16 channels in a single PXI slot, the highest density of its type, freeing chassis slots for other instrumentation.

These modules suit any application that relies on industrial current loop signaling, including:

  • Process instrumentation
  • PID (Proportional–Integral–Derivative) controllers
  • SCADA (Supervisory Control and Data Acquisition) systems
  • PLCs (Programmable Logic Controllers)

How Do PXI Current Loop Simulators Work?

A current loop simulator generates a precise, programmable current, typically within the industrial 4–20mA standard, to represent a sensor or transmitter output. The receiving device under test reads that current as if it came from a real field instrument.

Pickering modules combine 16-bit output resolution for control within 1 μA with built-in relays on every channel. These relays let you inject short-circuit and open-circuit faults to verify how your control system responds to wiring failures. A programmable slew rate reproduces different wire lengths and transmitter types, so you can validate behavior across a range of real-world conditions.

When Would an Engineer Use One?

Engineers use current-loop simulators to test a control system's response to analog inputs without deploying the physical sensors that represent those inputs. This approach is common in Hardware-in-the-Loop (HIL) testing, production test, and design verification for industrial and process control equipment.

Because the modules support fault insertion on every channel, they're particularly useful for validating safety and fault-handling logic, where testing with live sensors would be impractical or unsafe.

Key Features

  • Industrial Current Loop 4–20mA Simulation: Reproduces standard industrial transmitter outputs for accurate control system testing.
  • Multiple Modes of Operation: Supports 4–20mA, 0–24mA, ±24mA, 0–5V, ±12V, and ±5V ranges to address other analog applications.
  • Flexible Power and Logic: Operates self-powered or externally powered, sourcing or sinking, with positive or negative logic.
  • High Channel Density: Delivers up to 16 channels in a single-slot module.
  • Ground Loop Protection: Supports isolation from PXI ground to avoid ground loops.
  • Precision Output: 16-bit resolution for output control within 1μA, with accuracy of ±0.1% ± resolution.
  • Programmable Slew Rate: Simulates different wire lengths and transmitter types.
  • Fault Insertion: Built-in short and open fault insertion on every channel.

Choosing the Right Module

All modules in this range share the same core functionality and differ primarily by channel count. For applications with a fixed channel count, select the module that matches your requirement. If you expect your test system to expand, a higher-channel module can consolidate more signals into a single slot, reducing future integration work.

Compatibility and Connectivity

All Pickering PXI fault insertion modules plug into any compliant PXI chassis or a Hybrid slot in a PXIe chassis and can also be hosted in Pickering's LXI/USB modular chassis for remote control over Ethernet or USB. Our PXIe modules can be installed on any PXIe-compliant chassis.

We also offer in-house manufactured standard and custom mating cables and connectors for these modules to support fast, reliable system integration. Every product is backed by our three-year warranty, along with guaranteed long-term support and low obsolescence.

Frequently Asked Questions

What is the difference between a current loop simulator and a current loop transmitter?

A current loop transmitter is a real-field device that converts a physical measurement into a 4–20 mA signal. A current loop simulator reproduces that signal on demand for testing, allowing engineers to verify a control system without connecting live sensors.

Do the modules only support 4–20mA current loops?

No. In addition to 4–20mA, they support 0–24mA, ±24mA, 0–5V, ±12V, and ±5V modes, allowing a single module to cover a wider range of analog test applications.

Do Pickering current loop simulators have built-in readback functionality?

No. Pickering Interfaces current loop simulator modules do not feature built-in measurement or readback capabilities. They function strictly as analog output channels (sources or sinks) that simulate loop currents like 4–20mA using a 16-bit DAC. If your test setup requires you to verify or read back the actual loop current, you must route the signal through an external Digital Multimeter (DMM) or a separate PXI measurement module. Alternatively, if you are looking for Pickering simulation modules that do include built-in voltage and current readback, consider the Pickering battery cell simulator line, such as the 41-752A or 41-754 series.

Do these modules work in a PXIe chassis?

Yes. As PXI modules, they plug directly into any PXI chassis or a Hybrid slot in a PXIe chassis. They can also run in Pickering's LXI/USB modular chassis for remote operation.

PXI Current Loop Simulators | 4–20mA Analog Output Modules
Untitled Button

41-765-004

PXI/PXIe Analog Output/Current Loop Simulator Module - 4 Channel

PXI/PXIe Analog Output Module Ideal for Industrial Current Loop Simulation

Product Type
Current Loop Simulator
Platform
PXI/PXIe
Channels
4
€2,420

41-765-003

PXI/PXIe Analog Output/Current Loop Simulator Module - 8 Channel

PXI/PXIe Analog Output Module Ideal for Industrial Current Loop Simulation

Product Type
Current Loop Simulator
Platform
PXI/PXIe
Channels
8
€3,235

41-765-002

PXI/PXIe Analog Output/Current Loop Simulator Module - 12 Channel

PXI/PXIe Analog Output Module Ideal for Industrial Current Loop Simulation

Product Type
Current Loop Simulator
Platform
PXI/PXIe
Channels
12
€4,045

Design and Visualise Test System Signal Paths

Bring system configuration, schematic design, cable design and product selection into a single, cohesive workflow for test system development.

Start designing

Design and Visualise Test System Signal Paths

Design test system switching and signal routing.

41-765-001

PXI/PXIe Analog Output/Current Loop Simulator Module - 16 Channel

PXI/PXIe Analog Output Module Ideal for Industrial Current Loop Simulation

Product Type
Current Loop Simulator
Platform
PXI/PXIe
Channels
16
€4,845
Loading
Beta

How can I help?

Hi , I'm TESS - your friendly AI agent

Press Enter to submit

TESS is a moderated, AI agent. TESS can make mistakes, please verify important information independently.


Chat history

Log in or create an account to save & continue your chats with TESS.

Log in

or create an account