PXI Strain Gauge Simulators & Pressure Transducer Simulators

PXI strain gauge simulators are programmable resistor modules that replicate the resistance changes of a real strain gauge, allowing you to test strain gauge meters and industrial control systems without physical sensors. Pickering's strain gauge simulator modules provide 2-, 4-, or 6-channel simulation with high accuracy and temperature stability. They can also simulate Wheatstone bridge pressure sensors and transducers, making a single module suitable for a range of mechanical and pressure measurement applications.

Engineers reach for these modules when they need to validate measurement instrumentation, exercise control systems across their full input range, or replace in-house developed sensor rigs that are costly to maintain. Because the simulation is fully programmable, you can sweep through tension and compression values in software rather than physically loading a structural component. This reduces test cycle time and improves repeatability across every run.

How PXI Strain Gauge Simulators Work

A strain gauge simulator emulates the small resistance changes that occur when a strain gauge is placed under tension or compression. Rather than deforming a physical gauge, the module sets a precise resistance value through software, which the device under test reads as if it came from a real sensor.

Strain gauge simulation demands extremely fine setting resolution, high accuracy, and strong temperature stability. Pickering's modules deliver resolution down to 0.002 Ω and accuracy as tight as 0.03%, ensuring the simulated bridge output stays reliable throughout testing. This precision is what allows you to confidently distinguish a genuine measurement fault from simulator drift.

Choosing the Right Module

Each module in this range shares the same core purpose, testing strain gauge meters and industrial control systems, but differs in channel count and resistance range. When selecting a module, consider these criteria:

  • Channel count: Choose the number of channels to match the number of sensor inputs your device under test expects.
  • Resistance range: Match the module's minimum and maximum resistance to the nominal value of the strain gauge or pressure transducer you're emulating. The 350 Ω option suits standard strain gauges, while higher ranges up to 3 kΩ cover a wider variety of bridge sensors.
  • Resolution and accuracy: The 350 Ω modules offer the finest resolution (0.002 Ω) and tightest accuracy (0.03%), making them the better choice when your application demands the highest measurement fidelity.

Compatibility and Connectivity

All Pickering PXI strain gauge simulators plug into any compliant PXI chassis or a Hybrid slot in a PXIe chassis and can also be hosted in Pickering's LXI/USB modular chassis for remote control over Ethernet or USB. This flexibility lets you deploy the same module across bench, rack, and distributed test systems without changing your core hardware.

We also offer in-house manufactured standard and custom mating cables and connectors for these modules to support fast, reliable system integration. Every product is backed by our three-year warranty, along with guaranteed long-term support and low obsolescence.For applications requiring enhanced channel density or specialized resistance ranges, our engineering team can help configure a solution tailored to your test requirements. Comprehensive software support and detailed documentation simplify integration with popular test environments and existing automation frameworks

Software and Support

Pickering modules are supported by a comprehensive range of Windows and Linux drivers for straightforward integration into your existing test environment. Simulation software included with the PXI driver installation lets you develop test system software independently of the physical hardware, reducing the time your application spends tied to a live system.

For additional information, look through our support knowledgebase or feel free to contact your local Pickering engineer.

Frequently Asked Questions

Can these modules simulate pressure transducers?

Yes. Because pressure transducers often use a Wheatstone bridge configuration similar to that of strain gauges, these modules can simulate both Wheatstone bridge pressure sensors and strain gauges.

What resistance ranges are available?

Pickering's strain gauge simulator modules cover resistance values from 343Ω up to 3,159Ω, with nominal ranges including 350Ω, 1kΩ, 1.5kΩ, 2kΩ, and 3kΩ. This lets you match the module to the sensor's nominal resistance..

How many channels can I get in one module?

These modules are available in 2-, 4-, and 6-channel versions, so you can select the channel density that matches your test requirements and slot budget.

Do these modules work in a PXIe chassis?

Yes. As PXI modules, they can also plug directly into any hybrid slot in a PXIe chassis or be hosted in Pickering's LXI/USB modular chassis for remote operation.

PXI Strain Gauge & Pressure Transducer Simulators | Pickering
Untitled Button
Channels
Channel Type
Max R (Ω)
Resolution (Ω)
Accuracy (%)
Min R (Ω)
Price

40-265-102

PXI Strain Gauge Simulator Module 2-Channel, 3kΩ

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
2
Channel Type
Strain Gauge
Max R (Ω)
3159
Resolution (Ω)
0.025
Accuracy (%)
0.06
Min R (Ω)
2841
Product Type
Programmable Resistors
Platform
PXI
€3,180

40-265-012

PXI Strain Gauge Simulator Module 2-Channel, 350 Ohm

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
2
Channel Type
Strain Gauge
Max R (Ω)
357
Resolution (Ω)
0.002
Accuracy (%)
0.03
Min R (Ω)
343
Product Type
Programmable Resistors
Platform
PXI
€3,180

Design and Visualise Test System Signal Paths

Bring system configuration, schematic design, cable design and product selection into a single, cohesive workflow for test system development.

Start designing

Design and Visualise Test System Signal Paths

Design test system switching and signal routing.

40-265-202

PXI Strain Gauge Simulator Module 2-Channel, 1KΩ

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
2
Channel Type
Strain Gauge
Max R (Ω)
1053
Resolution (Ω)
0.01
Accuracy (%)
0.06
Min R (Ω)
947
Product Type
Programmable Resistors
Platform
PXI
€3,180

40-265-402

PXI Strain Gauge Simulator Module 2-Channel, 1.5KΩ

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
2
Channel Type
Strain Gauge
Max R (Ω)
1579.5
Resolution (Ω)
0.0125
Accuracy (%)
0.06
Min R (Ω)
1420/1420.5
Product Type
Programmable Resistors
Platform
PXI
€3,180

40-265-302

PXI Strain Gauge Simulator Module 2-Channel, 2KΩ

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
2
Channel Type
Strain Gauge
Max R (Ω)
2106
Resolution (Ω)
0.02
Accuracy (%)
0.06
Min R (Ω)
1894
Product Type
Programmable Resistors
Platform
PXI
€3,180

40-265-104

PXI Strain Gauge Simulator Module 4-Channel, 3kΩ

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
4
Channel Type
Strain Gauge
Max R (Ω)
3159
Resolution (Ω)
0.025
Accuracy (%)
0.06
Min R (Ω)
2841
Product Type
Programmable Resistors
Platform
PXI
€4,200

40-265-014

PXI Strain Gauge Simulator Module 4-Channel, 350Ω

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
4
Channel Type
Strain Gauge
Max R (Ω)
357
Resolution (Ω)
0.002
Accuracy (%)
0.03
Min R (Ω)
343
Product Type
Programmable Resistors
Platform
PXI
€4,200

40-265-204

PXI Strain Gauge Simulator Module 4-Channel, 1kΩ

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
4
Channel Type
Strain Gauge
Max R (Ω)
1053
Resolution (Ω)
0.01
Accuracy (%)
0.06
Min R (Ω)
947
Product Type
Programmable Resistors
Platform
PXI
€4,200

40-265-404

PXI Strain Gauge Simulator Module 4-Channel, 1.5kΩ

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
4
Channel Type
Strain Gauge
Max R (Ω)
1579.5
Resolution (Ω)
0.0125
Accuracy (%)
0.06
Min R (Ω)
1420/1420.5
Product Type
Programmable Resistors
Platform
PXI
€4,200

40-265-304

PXI Strain Gauge Simulator Module 4-Channel, 2kΩ

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
4
Channel Type
Strain Gauge
Max R (Ω)
2106
Resolution (Ω)
0.02
Accuracy (%)
0.06
Min R (Ω)
1894
Product Type
Programmable Resistors
Platform
PXI
€4,200

40-265-106

PXI Strain Gauge Simulator Module 6-Channel, 3kΩ

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
6
Channel Type
Strain Gauge
Max R (Ω)
3159
Resolution (Ω)
0.025
Accuracy (%)
0.06
Min R (Ω)
2841
Product Type
Programmable Resistors
Platform
PXI
€5,230

40-265-016

PXI Strain Gauge Simulator Module 6-Channel, 350Ω

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
6
Channel Type
Strain Gauge
Max R (Ω)
357
Resolution (Ω)
0.002
Accuracy (%)
0.03
Min R (Ω)
343
Product Type
Programmable Resistors
Platform
PXI
€5,230

40-265-206

PXI Strain Gauge Simulator Module 6-Channel, 1kΩ

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
6
Channel Type
Strain Gauge
Max R (Ω)
1053
Resolution (Ω)
0.01
Accuracy (%)
0.06
Min R (Ω)
947
Product Type
Programmable Resistors
Platform
PXI
€5,230

40-265-406

PXI Strain Gauge Simulator Module 6-Channel, 1.5kΩ

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
6
Channel Type
Strain Gauge
Max R (Ω)
1579.5
Resolution (Ω)
0.0125
Accuracy (%)
0.06
Min R (Ω)
1420/1420.5
Product Type
Programmable Resistors
Platform
PXI
€5,230

40-265-306

PXI Strain Gauge Simulator Module 6-Channel, 2kΩ

Simulates the operation of a range of strain gauges making it ideal for testing strain gauge meters and a wide variety of industrial control systems

Channels
6
Channel Type
Strain Gauge
Max R (Ω)
2106
Resolution (Ω)
0.02
Accuracy (%)
0.06
Min R (Ω)
1894
Product Type
Programmable Resistors
Platform
PXI
€5,230

Filter

Channels

The number of discrete channels in a single topology.

Channel Type

The topology of each channel

Max R (Ω)

Maximum resistance each channel may be programmed to

Resolution (Ω)

Smallest discrete setting step for each resistance channel

Accuracy (%)

The accuracy of programmed resistance

Min R (Ω)

Minimum resistance each channel may be programmed to

Loading
Beta

How can I help?

Hi , I'm TESS - your friendly AI agent

Press Enter to submit

TESS is a moderated, AI agent. TESS can make mistakes, please verify important information independently.


Chat history

Log in or create an account to save & continue your chats with TESS.

Log in

or create an account