Four Battery Cell Simulators with a 750 V isolation barrier in a Single PXI or PXIe Slot, Suitable For Battery Stack Emulation.
Please contact sales office for availability
Targeting EV, automotive, aerospace, energy storage and electric aircraft applications, the new battery simulator modules occupy a single PXI slot. These 4-channel battery simulators are capable of supplying up to 7 V and 300 mA per channel. The channels are fully isolated from ground and from each other, allowing series connection to simulate batteries in a stacked architecture. The 750 V or 1 kV isolation barrier (version dependent) allows the module to be used as a lower power version of a battery stack, representative of those used for vehicle propulsion.
Each channel provides independent power and sense connections, allowing the simulator to sense a remote load and correct for wiring losses. The battery simulator is designed to respond to dynamic loads, minimizing the need for local decoupling capacitors at the load. The module also can independently read the voltage at the load (via sense lines) and current for each channel.
A control line on the user connector allows the user to shut down all battery simulator channels with one signal. Multiple control lines may be linked together to easily inhibit the output when using many series-connected modules. This also provides a means of automatic shutdown when connectors are removed.
These modules can be combined with our other PXI switch and simulation modules, including high voltage switching, fault insertion, thermocouple simulation, RTD simulation, as well as with other vendors' PXI modules, such as a CANbus interface, to create a fully flexible BMS test system.
This battery simulator module is also available in a version with with a simplified current sink function - see 41/43-752A-902. For more information on the operation of the current sink for this range of modules, please refer to the user manual.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
Includes full information and specifications
PDF, 1011.72 KB
Includes manual, extended specifications, installation instructions and data
PDF, 3.82 MB
High Voltage 37 Pin D-Type Connector Accessories Datasheet
A complete list and documentation for mating connection
PDF, 2.23 MB
|Software drivers & downloads for Switching & Simulation Products|
|Find CAD 3D Models downloads for products here.|
Our worldwide network of partners offers a variety of services from integration to consulting.
Information on software drivers, product comparisons and technical support for our entire product range.
This tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
Success stories, product videos and more—find the information you need about our switching and simulation.
Find support across the globe, with offices and agents in the Americas, Europe and Asia.
Filter our database of 1000s of products to your exacting specifications.