This connector block provides a simple method of connecting to 78-Pin D-Type connectors. The screw terminals use a rising cage clamp mechanism to minimize risk of copper strand breakage. PTFE cables are recommended for use with this connector block to maximise copper cross-sectional area and insulation properties. Connector blocks have higher losses than a cable connection and the breakdown voltage is controlled by clearances to the metal shell. The metal shell includes an internal insulation barrier under the carrier board.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
|Connector Type (End A):||78-Pin D Subminiature Density and a half|
|Gender (End A):||Female|
|Gender (End B):||Female|
|Securing Method (End A):||4-40 UNC screwlocks male|
|Suitable for Pickering Switch Products:||Yes|
Our worldwide network of partners offers a variety of services from integration to consulting.
Information on software drivers, product comparisons and technical support for our entire product range.
This tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
Find support across the globe, with offices and agents in the Americas, Europe and Asia.