The 41/43-765-002 is a 12-channel Analog Output Module designed to meet the requirements of industrial control applications utilising current loops 4 – 20mA. It consists of up to four 16-bit, digital-to-analogue converters (DAC), capable of creating four current outputs each. Output current within 0mA - 4mA and 20mA - 24mA, give the ability to simulate error or extra signalling conditions. The ±24mA mode gives the ability to simulate either sourcing or sinking sensor.
Typical applications of this module span across: 4 – 20mA current loops, analogue output modules, programmable logic controllers (PLCs), industrial automation, sensor transmitters, process control.
The outputs can work in one of several modes of operation: 4-20mA, 0-24mA or +/-24mA. As well as low power voltage modes of operation: 0-5V, +/-12V or +/-5V.
Each DAC of the module can be powered up independently, either from the chassis power supply or can work as fully isolated unit, being powered up from an external source. This approach removes issues of ground looping. The DAC is always sourcing either on positive or negative logic, so no voltage source is required in-line.
Each channel of the 41/43-765 module is able to simulate the short and open circuit conditions that can be experienced in a system due to faulty wiring or sensors.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
Includes full information and specifications
PDF, 897.4 KB
Includes manual, extended specifications, installation instructions and data
PDF, 2.94 MB
Related 78 Pin D-type Connector Accessories Datasheet
A complete list and documentation for mating connection accessories
PDF, 4.08 MB
Our worldwide network of partners offers a variety of services from integration to consulting.
Information on software drivers, product comparisons and technical support for our entire product range.
This tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
Find support across the globe, with offices and agents in the Americas, Europe and Asia.