Click image to enlarge


The 41-753 is a battery simulator module that can be used to simulate the power supplies of cellular phones and other portable battery devices. It features fully floating output terminals that can deliver voltages up to 6 Volts. The fast responding remote sense connections allow the module to regulate the supply voltage at the device under test. The output terminals can float ±50V relative to the front panel ground to ensure the accurate simulation of battery operation.
A module can source or sink current to provide simulation of a battery supply or a battery under charge. The programmable current sink can be set to divert up to 0.5A of the load current, permitting the battery simulator to act as a net current sink when connected to a charger circuit. The 41-753 is capable of delivering up to 2.8 Amps into the load. The output resistance of the 41-753 can be programmed for values up to 1.15 ohms to simulate the effect of battery output resistance when connected to time varying loads.
Voted a Top 50 product of 2010/11 by Test and Measurement World.

Key Features

  • Single Slot Battery Simulator Module
  • Remote Voltage Sense
  • Isolated Output
  • Output Voltage up to 6V
  • Power Supplied From PXI Backplane
  • Programmable Output Resistance
  • Programmable Current Sink Capability to 0.5A For Charger Load Simulation
  • VISA and IVI Drivers Supplied For Windows XP/Vista/7/8 and Soft Front Panel
  • Supported by PXI or LXI Chassis
* Note: Product image above may be a different model in this range and is for illustrative purposes only

Product specifications

If no specifications are present, please see the product datasheet in this section. 

Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.

Need to narrow down your search by specifications, try our Product Selector


PDF Datasheet
Includes full information and specifications
PDF, 850.32 KB
PDF Manual
Includes manual, extended specifications, installation instructions and data
PDF, 5.36 MB
Software Drivers and Downloads for Switching & Simulation Products

Tim Rhodes

Regional Sales Manager

Tim manages the following states in the United States: 

  • AK, AZ, AR, CA, CO, HI, ID, LA, MT, NV, NM, OK, OR, TX, UT,  WA, WY
He also manages Latin America

Find the local rep/agent in your area here >>

Kevin Wheeler

Regional Sales Manager

Kevin manages the following states in the United States:


He also manages Canada

Find the local rep/agent in your area here >>

Bill Green

Regional Sales Manager

Bill manages the following states in the United States: 

  • AL, FL, GA, MS, NC, PR, SC, TN,    

Languages: English and Spanish

Find the local rep/agent in your area here >>

Need help?


Search our knowledgebase for information on software drivers, product comparisons and technical support for our entire product range.


Product Selector

Because we offer such a large range of products, this tool will help you narrow down our offering to get you the correct switch and simulation solution you need.

Try the selector

Resource center

From success stories and product videos to product literature and newsletters, find the information you need about our switching and simulation solutions.

Get the resources you need

Worldwide presence

We supply and support our products across the globe, with seven offices in the Americas, Europe and Asia as well as additional representation. 

Find a local office or agent near you

Can't find the product you need?

Filter our database of 1000s of products to your exacting specifications.

Try Product Selector

No thanks