Designed to simulate common faults on two wire communications interfaces.
Supported by our eBIRST Switching System Test Tools
Estimated shipping is 15 to 30 working days
Please contact sales office for availability
This PXI Fault Insertion module is designed to simulate common faults on two wire communication interfaces such as CAN Bus. This module supports 4 or 8-channels of two wire serial interfaces. Each channel can simulate an open fault in either or both wires, a short between both wires or a short to one of eight externally applied fault connections, such as a battery connection or ground, via four fault buses.
Each channel can support up to 0.3A and is rated to handle up to 100V between the wire pairs. The wire pairs have controlled transmission line impedance suited to most differential pair signalling systems, including fast CAN Bus interfaces and RS232. Each fault bus is capable of carrying 2A allowing multiple channels to be connected to the same fault condition. Additionally, each fault bus features a changeover relay to allow the user to connect alternative fault conditions to the fault buses.
If no specifications are present, please see the product datasheet in this section.
Please note: In some cases, for products like our Scalable LXI Chassis, the specifications can be found on the datasheets for the associated plugin modules that are inserted into these chassis. To find these modules, go to the "Also in the Range" link above.
Need to narrow down your search by specifications, try our Product Selector
|Product Type:||Fault Insertion Switching|
|Max I (A):||0.3|
|Max V DC:||100|
PDF Data Sheet
Includes full information and specifications
PDF, 867.33 KB
Includes manual, extended specifications, installation instructions and data
PDF, 3.29 MB
Related 78 Way D-type Connector Accessories Datasheet
A complete list and documentation for mating connection accessories
PDF, 4.25 MB
|Software Drivers and Downloads for Switching & Simulation Products|
Search our knowledgebase for information on software drivers, product comparisons and technical support for our entire product range.
Because we offer such a large range of products, this tool will help you narrow down our offering to get you the correct switch and simulation solution you need.
We supply and support our products across the globe, with seven offices in the Americas, Europe and Asia as well as additional representation.